Voltune
Well-Known Member
- Joined
- Sep 12, 2019
- Threads
- 7
- Messages
- 47
- Reaction score
- 22
- Location
- Washington State USA
- Vehicle(s)
- Ranger 2019 XLT 4x4 Supercab (302A)
- Thread starter
- #1
Where is the outside temperature sensor(s) and should it be updating in real-time or is there supposed to be a delay?
I have noticed on multiple occasions that the display reads vastly different than what the outside temperature really is and takes multiple minutes to update to a more accurate temperature.
This afternoon, it was 93 degrees outside and when I started up the truck it displayed 80 degrees. I am not sure if that was the previous day temp reading before I shut it off the previous day. After about 5 minutes, it then started to increment 1 to 2 degrees at a time over the course of a few seconds and stopped at 91 degrees.
I am just wondering if this is normal behavior or if something is wonky.
I have noticed on multiple occasions that the display reads vastly different than what the outside temperature really is and takes multiple minutes to update to a more accurate temperature.
This afternoon, it was 93 degrees outside and when I started up the truck it displayed 80 degrees. I am not sure if that was the previous day temp reading before I shut it off the previous day. After about 5 minutes, it then started to increment 1 to 2 degrees at a time over the course of a few seconds and stopped at 91 degrees.
I am just wondering if this is normal behavior or if something is wonky.
Sponsored