Friday yet?
Well-Known Member
Guess they had to delete the lock due to the "chip shortage."
Sponsored
Or a design flaw that results in it attempting to hold keys hostage.Guess they had to delete the lock due to the "chip shortage."
Or a design flaw that results in it attempting to hold keys hostage.
@Stewthebassman happy you got yours worked out!
The whole keyed plug thing was terrible. They put a cover on the front side, which being on the back of the truck, really only gets a little rain or snow on it occasionally, but they left the back side of it open, which is exposed to the underside of the truck and all the rain, snow, dirt and debris being thrown at it while driving. It needs to be regularly lubricated or it will get sticky and or seize.
Worse than that, it's a cheap plastic lock, in a piece of sheet plastic that is a 'security' feature to prevent spare wheel theft. It can be forced out with a screwdriver or a sharp razor knife to cut it free. Also I don't know anyone who has had their spare stolen, even those without a plastic defense system.
Good decision to drop it.
Reminds me of my plasma table when it acts up (sticky solenoid). Sometimes a hard knock on the cabinet fixes the problem. I call that a 'vibration reset'.You might have to remove your damper first…
Maybe tap/rap it on a hard surface to see if it resets, bottom side.
Does this mean anyone can gain access to the spare?It is also a deleted item on later model Rangers, so you may not have one being a '23 owner.
Does this mean anyone can gain access to the spare?
Sure but that lock isn't anything special. Someone hell bent on stealing your spare could pry that lock out no problem. Considering they would also need to be strolling around with the bar needed to drop the spare I don't think it is a huge issue. If someone really wants to steal the spare that lock is probably just a minor annoyance and not really a deterrent in my opinion.Does this mean anyone can gain access to the spare?
@Stewthebassman happy you got yours worked out!
The whole keyed plug thing was terrible. They put a cover on the front side, which being on the back of the truck, really only gets a little rain or snow on it occasionally, but they left the back side of it open, which is exposed to the underside of the truck and all the rain, snow, dirt and debris being thrown at it while driving. It needs to be regularly lubricated or it will get sticky and or seize.
Worse than that, it's a cheap plastic lock, in a piece of sheet plastic that is a 'security' feature to prevent spare wheel theft. It can be forced out with a screwdriver or a sharp razor knife to cut it free. Also I don't know anyone who has had their spare stolen, even those without a plastic defense system.
Good decision to drop it.
Indeed. I have the keyed securityplug but I have it hanging out in the glovebox. I would rather chance the spare getting stolen rather than getting stuck somewhere because I destroyed the key trying to fix the ops original issue.
I'm guessing that due to that 6 ounce lock deletion the ass end on a '23 is even higher than the previous models.Or a design flaw that results in it attempting to hold keys hostage.
My truck has 17" wheels and tires on the ground and itIndeed. I have the keyed securityplug but I have it hanging out in the glovebox. I would rather chance the spare getting stolen rather than getting stuck somewhere because I destroyed the key trying to fix the ops original issue.