FORScan Modifications

[micl9]

I just installed bed power and lights off the stock 20 amp plug located behind the driver rear wheel. this come on when you turn the key and then Stays on for 2hrs (I'm told).
Does anyone know if forscan could make this power on with unlock?
Its a pain when loading at night to have to insert the key to enable the bed lights.

Sponsored

 

[mark_anderson_us]

The dreaded "Double Honk" is gone!!

How. Drives me mad and I'm sure my neighbors are not keen on it at 3am

 

[RobmJ]

For anybody who made the change to show the speed limit signs you can also activate a chime if you go over the limit you have set. It's under chimes in the IPC module. Just enable it. I forget the exact wording but it is obvious which one it is. Also adds a "chime" check box to the setup screen so you can turn it off or on. Tested today and it chimes once every time you go over your set limit. If I have time later I will try to post pics.

Where do I find the IPC module? I’m not seeing it on FORScan

 

[fslec]

Where do I find the IPC module? I’m not seeing it on FORScan

Not sure why you wouldn't see it in ForScan??

 

[RobmJ]

Not sure why you wouldn't see it in ForScan??

Figured it out .. I had to change a setting so FORScan reads both ms and Hs can

 

[revbevis]

I’m curious to know if we can mod it to autofold the mirrors when in park or locked with the key fob.

You need to purchase the auto window and auto fold mirror module.

 

[RNS]

Hey guys!
I have the Ford Performance Tune and wondering if I need to remove said tune before I use forscan???
I've tried but no luck with tune installed..

Tuner (crashed/screen stopped accepting touch) shortly after install and been waiting months for Ford to figure out how to get my stock brain back onto new unit!!

 

[Mr.Scary]

Question for everyone I am new to forscan. I wanted to enable terrain management on my ranger along with a few things. So I connect to my truck today save a profile of stock config. And when I try to start a service action to get in make the changes it tells me I have to do a relearn because code p160a is present. So I do the relearn and it keeps telling me the same thing.
Any ideas to help me out.
FYI I do have a livernoise tune on my ranger.
Thanks

 

[Adventure Ranger]

Corrected my tire size today = Speedo is 100% confirmed with 2 independent GPS units.
Set my heated seat controls up on the touch screen. Also set the start up screen to "Ford Performance" the Cobra is a pretty cool look as it starts up !

 

[Mr.Scary]

Ok sorted it out returned my truck to stock just in case. Will put tun back in tomorrow.
I did

off road screen
Off road gauge
Terrain management
Parking lights on with drl
Fog lights on with high beams
Fog lights on with turn direction
Global windows up and down.
Although I can’t get the global windows to work.
My truck is a 2019 xlt 4x4 sport pkg

 

[Igor]

Also set the start up screen to "Ford Performance" the Cobra is a pretty cool look as it starts up !

How to do that? Or is thin in Wiki? I mean what's the code for this screen?

 

[Big Blue]

Ok sorted it out returned my truck to stock just in case. Will put tun back in tomorrow.
I did

off road screen
Off road gauge
Terrain management
Parking lights on with drl
Fog lights on with high beams
Fog lights on with turn direction
Global windows up and down.
Although I can’t get the global windows to work.
My truck is a 2019 xlt 4x4 sport pkg

Global windows doesn't work on Rangers, we don't have required door modules. There is an aftermarket module you can add to get global up/down and control with remote. Do a search on global windows, several threads.

 

[Big Blue]

How to do that? Or is thin in Wiki? I mean what's the code for this screen?

Can be done from the APIM module configuration, select from list.

 

[Mr.Scary]

Global windows doesn't work on Rangers, we don't have required door modules. There is an aftermarket module you can add to get global up/down and control with remote. Do a search on global windows, several threads.

Thanks big blue i did figure it was something like that. i work stupid hours so i don't get much time to search.

with the Terrain Management dose it need the Intelligent 4X4 enabled as well or is that something else all together for the lariat?

 

[Adventure Ranger]

How to do that? Or is thin in Wiki? I mean what's the code for this screen?

With the latest paid version of Forscan it gives you the option to change the start up screen. There’s about a dozen options. I picked the Ford Performance not knowing what it was- now I really like it.

Sponsored