Browsing on eBay and found this......

[MXGOLF]

I agree Steve the SCAB's are the best looking Rangers by far!!!!!! No Doubt About It!

Sponsored

 

[bandit22]

Matchbox and hot wheels have 1:64 5th gens as well. Too bad no one seems to make one with Tremor decals :/

 

[subquark]

For those with a 3D printer:
Ford Ranger Super Cab XLT 2021 3D model ($93)
https://3dmodels.org/3d-models/ford-ranger-super-cab-xlt-2018/

But, LOL, add $1,200 for a detailed interior! I didn't pay that much for the 101A group! =D

 

[RedlandRanger]

For those with a 3D printer:
Ford Ranger Super Cab XLT 2021 3D model ($93)
https://3dmodels.org/3d-models/ford-ranger-super-cab-xlt-2018/

But, LOL, add $1,200 for a detailed interior! I didn't pay that much for the 101A group! =D

There you go, @Msfitoy! For only $900 you can get an STL model and print your own! You can scale test your new camper! Too bad it is the ROTW version not the NA version.

 

[Grumpaw]

For those with a 3D printer:
Ford Ranger Super Cab XLT 2021 3D model ($93)
https://3dmodels.org/3d-models/ford-ranger-super-cab-xlt-2018/

But, LOL, add $1,200 for a detailed interior! I didn't pay that much for the 101A group! =D

I'm not into 3D....is that $93 just for the plans, and you have to have your own 3D printer ???
Heck, save yourselves $83 bucks.....send me $10 and I'll send you a photo of my Scab !!!

 

[Msfitoy]

There you go, @Msfitoy! For only $900 you can get an STL model and print your own! You can scale test your new camper! Too bad it is the ROTW version not the NA version.

You had me falling backwards...this STL better include every 10mm bolts on the truck for $900 lol...ok it was 1/10 in reality...

I have a 3D model purchased a while ago for my on going camper project and you can see that rendered with many topper concepts...I got around to planning on printing a file and that requires a complete rebuild of the polygon files and then make it solid for STL...I also have various other elevations that confirms some inaccuracies of that model...the front end plan view in particular...so I'm in the slow process of building my own 5th gen CAD data based on those information...when I have spare time...

Blue surfs are my new data build so far...

 

[BladeRanger]

Got this at CVS pharmacy.

 

[bostonburner]

Where did you buy the model you have? I've been looking for a 1/10 scale body to throw on one of my rc crawler chassis but haven't had much luck. At this point it looks like I just need to find a model and print it myself.

You had me falling backwards...this STL better include every 10mm bolts on the truck for $900 lol...ok it was 1/10 in reality...

I have a 3D model purchased a while ago for my on going camper project and you can see that rendered with many topper concepts...I got around to planning on printing a file and that requires a complete rebuild of the polygon files and then make it solid for STL...I also have various other elevations that confirms some inaccuracies of that model...the front end plan view in particular...so I'm in the slow process of building my own 5th gen CAD data based on those information...when I have spare time...

Blue surfs are my new data build so far...

 

[Msfitoy]

Where did you buy the model you have? I've been looking for a 1/10 scale body to throw on one of my rc crawler chassis but haven't had much luck. At this point it looks like I just need to find a model and print it myself.

I bought mine off Turbo squid but that's not what you want...the mesh file is very heavy and not solid so that's why I'm going the extra mile to rebuild it so I can control the surfaces and accuracy...

Here's a free file from Cults that is print ready...I think...
https://cults3d.com/en/3d-model/art/fordranger-wildtrak-for-3d-printing-stl-files

Type in "Ranger" search at their site and look around...

 

[bostonburner]

Thanks, they have a lot of models to pick from! Think I'm going to get this one since it's a hollow shell, now I'll just have to track down some hot pepper metallic paint for it!

I bought mine off Turbo squid but that's not what you want...the mesh file is very heavy and not solid so that's why I'm going the extra mile to rebuild it so I can control the surfaces and accuracy...

Here's a free file from Cults that is print ready...I think...
https://cults3d.com/en/3d-model/art/fordranger-wildtrak-for-3d-printing-stl-files

Type in "Ranger" search at their site and look around...

 

[PapaBill]

Same color (well sort off) like my Ranger

MAISTO Licensed 2019 Ford Ranger 4 Door Cab Blue Scale 1:27 Collection Toy

Are you over there with the USAF?

 

[Ibanezbass671]

Are you over there with the USAF?

I lived, born here in Guam of the USA. =)

 

[Racket]

Got this at CVS pharmacy.

WANT (but not for $$hipping cost)

 

[stringbreaker]

Got this at CVS pharmacy.

I have this same model I bought from Amazon

 

[RangerDanger617]

Where did you buy the model you have? I've been looking for a 1/10 scale body to throw on one of my rc crawler chassis but haven't had much luck. At this point it looks like I just need to find a model and print it myself.

Still playing around with the idea of a body for a Traxxas TRX-4M. myself. Have the Bronco currently.

Sponsored