What did you receive in the mail today for your Ranger?

[TVRangerSTX]

Probably going to want 3ton jackstands for the ranger.

Hmmm, it only weighs 4200 lb...

Sponsored

 

[Motorpsychology]

Hmmm, it only weighs 4200 lb...

You'll need 3 Ton for the 2030 BEV Ranger, might as well get them now. A battery pack will likely add 1,000-1,200# to the empty weight.

 

[TVRangerSTX]

You'll need 3 Ton for the 2030 BEV Ranger, might as well get them now. A battery pack will likely add 1,000-1,200# to the empty weight.

Um, yeah, don't think I'll be wantin' a 'lectric truck, thanks ???!

 

[underwhelmed]

Another Stage3 delivery today…Swing Case.

 

[BS67]

Got a magnetic gray 17" OEM rim off Ebay........then got a 255/65R17 Bridgestone Dueler tire also. Gonna have the tire mounted and balanced and use as a spare. Rim will be here friday.....tire will be here monday!

 

[ylwjacket]

Auxbeam controller, ditch lights and brackets, and grille light bar. Oh yeah, trailer brake controller mount for the cig lighter.

 

[AzScorpion]

Got a magnetic gray 17" OEM rim off Ebay........then got a 255/65R17 Bridgestone Dueler tire also. Gonna have the tire mounted and balanced and use as a spare. Rim will be here friday.....tire will be here monday!

Brian, make sure they mount it with the air valve facing down. This way you can check it periodically without having to lower it.

 

[Friday yet?]

Bed mat and tailgate protector.

 

[BS67]

Brian, make sure they mount it with the air valve facing down. This way you can check it periodically without having to lower it.

How do they mount it 'down' Dave?? That valve stem will only go in one way! Sorry, I'm confused!

 

[AzScorpion]

How do they mount it 'down' Dave?? That valve stem will only go in one way! Sorry, I'm confused!

From the factory the rim is mounted under the truck with the valve stem up towards the bed. It will fit reversed so the valve faces down.

 

[BS67]

From the factory the rim is mounted under the truck with the valve stem up towards the bed. It will fit reversed so the valve faces down.

Oh he!!.........OK.........that's how I usually mount my spares. Sorry I wasn't gettin it! Must be my bedtime!! Haaaaa!

 

[subquark]

Got some more new tools for my will-never-ever-get-used on-board tool kit (now that I have a real garage tool cart, I don't want to scavenge it for tools). Too bad that I have to search for new tools - oh the drudgery! =p

My diminutive lug wrench is in it's home, ready for those on the spot road rage flat tires.

 

[DukeCanBuildit]

Oh he!!.........OK.........that's how I usually mount my spares. Sorry I wasn't gettin it! Must be my bedtime!! Haaaaa!

Brian, the spare tire hanger is only lightly padded, which is no big deal for the steelie factory spare. When the wheel is flipped with the valve facing down, the hanger will be cinched up against the “good” side of your shiny new wheel. I haven’t found a good solution for additional padding yet (yes, laziness) so mine is still valve side up because I don’t want my nice wheel getting buggered up by the hanger.

 

[WV_Ranger]

Weathertech ventvisors

 

[RedDakooter05]

Sponsored