Skeletor
Well-Known Member
Installed Bilstein 6112 struts on the front and Bilstein 5160 reservoir shocks on the rear. The truck feels like a totally different truck now. No more jouncing, diving when braking and pretty much no body roll now. Able to take 20mph turn at 50mph without slipping or any oh crap feeling(I am a professional driver and was on a closed course). Set my ring on the 6112's, 3 down to level the front at 2.4" lift on 2wd. Potholes, tight turns, normal driving, high speeds, hills and jumps, everything is so much better now. This is the way the truck should have been from the factory. I highly recommend everyone to change out their shocks and struts to this setup as it is much cheaper than most of the other options out there. Can't go wrong with Bilstein the front struts are significantly larger diameter than stock. Watched a YouTube video for our rangers on the install. Very easy if you are somewhat mechanically inclined. Shop rates were $600-$860 with 5 1/2 hour labor quote. I was able to install in 4 hours with a harbour freight spring compressor for the front struts. The rear 5160's were very easy to install.
Sponsored