What did you receive in the mail today for your Ranger?

[Blue_Ranger]

How do u like yours? I have the same one...I still get some leaks inside mainly in the front 2 corners....cause the bulk seal seems short on both sides by like only a lil bit? Where did u drain yours? I put drain tubes down the side hole and it drains in front of the rest tires

I cut a small hole in that plug at the front of the bed and stuck the drain hose through there. Did your instructions have you put that bracket on? I'm having issues trying to keep the rails for the cover on and am wondering if that is why.

Sponsored

 

[Ranger3]

I cut a small hole in that plug at the front of the bed and stuck the drain hose through there. Did your instructions have you put that bracket on? I'm having issues trying to keep the rails for the cover on and am wondering if that is why.

Yes I did do u have a bed liner?

 

[Blue_Ranger]

Yes I did do u have a bed liner?

I did but took it out (drop in). I guess I’ll have to call them to get another set of instructions.

 

[Glocker]

Yes I did do u have a bed liner?

I have a drop in bedliner and drilled a corresponding hole in the bedliner to match the hole I drilled in the plug. It came out nice and tidy and is working well!

 

[Ranger3]

I did but took it out (drop in). I guess I’ll have to call them to get another set of instructions.

Do u have any water intrusion in the bed?

 

[Glocker]

Do u have any water intrusion in the bed?

I know you're not specifically asking me, but I do have a little water intrusion into the bed but it's not enough for me to be concerned about. In fact, the ridges on the drop in bedliner's floor keep my stuff out of what very little water makes it's way into the bed. I'm also running a bed rack on my bed, and the bed mounts for it are positioned on the bed rails, but under the tonneau cover rails. I put some foam tape down on the bed rails to help stop water intrusion, but at the nose of the bed, there is a little bit of space I wasn't able to seal. Plus, I haven't been able to seal the tailgate yet (I have the kit but not the time to put it all on). I drove from GA to NJ and back about a month ago and some of it was through some pretty hard and crappy rain and my stuff out back was absolutely fine.

 

[FoD]

I know you're not specifically asking me, but I do have a little water intrusion into the bed but it's not enough for me to be concerned about. In fact, the ridges on the drop in bedliner's floor keep my stuff out of what very little water makes it's way into the bed. I'm also running a bed rack on my bed, and the bed mounts for it are positioned on the bed rails, but under the tonneau cover rails. I put some foam tape down on the bed rails to help stop water intrusion, but at the nose of the bed, there is a little bit of space I wasn't able to seal. Plus, I haven't been able to seal the tailgate yet (I have the kit but not the time to put it all on). I drove from GA to NJ and back about a month ago and some of it was through some pretty hard and crappy rain and my stuff out back was absolutely fine.

Nice RotoPax.

I had ordered fuel and water pax (small ones) for day tripping, but they're on a 30-60 day delay according to retailer ... which is ok, can make do until they arrive.

 

[Glocker]

Nice RotoPax.

I had ordered fuel and water pax (small ones) for day tripping, but they're on a 30-60 day delay according to retailer ... which is ok, can make do until they arrive.

Check out the "Fuel Pax" on their website. The 4.5 gal Fuel Pax cost me $99 before shipping and INCLUDED the two mounts!!!! Their pricing may have gone up a little due to COVID and such, but it's a great deal!

In fact, the price has gone up but is still a great deal. Basically $110 for the 4.5 gal and two mounts!
https://rotopax.com/4-5-gallon-fuelpax.html?category_id=31

I need to get the water pax and mounts but I'm waiting for blems!

 

[Dhass68]

Since I’ll end up with my truck back soon, I’ve been ordering things lately. This was waiting for me when I came home from work.

Weird thing is, I ordered both front and rear sets at the same time, from the same vendor, and only the front showed up today. Rear’s scheduled for tomorrow

I didn't know you could get them through the mail in boxes

 

[Mastodon]

I didn't know you could get them through the mail in boxes

Oh yeah. It’s the best way to do it. The only way, really.

Makes it easier to pack around inside the trucks. Also helps to contain all of the floof.

 

[RangerAl87]

Received my rain guards today

 

[Turbo Tim]

It has started, haven’t got the truck yet but parts are starting to show up, starting with the easy obvious one…..

 

[WhyNot21]

I figured I should pick these up before they realize what they have and jack the price up!

 

[Glocker]

These aren't the most exciting items to receive in the mail, but I'm happy to have them in hand.

 

[Manny]

Powder coated red bash guard / skid plate

Sponsored