airline tech
Well-Known Member
- Joined
- Aug 24, 2022
- Threads
- 20
- Messages
- 1,683
- Reaction score
- 3,567
- Location
- Midwest - KS
- Vehicle(s)
- 2022 Ranger Lariat-Super Crew, Cactus Gray
- Occupation
- Aircraft Tech
The question is:You don't need a tool just follow the following instructions. I have used this many times with no issues.
Ford Tire Pressure Monitoring System (TPMS) Reset Instructions
There are two parts to resetting your Ford vehicle’s Tire Pressure Monitoring System (TPSM). For this process you will need to:
(1) activate TPMS reset mode and (2) re-train each of your vehicle’s tire pressure sensors.
Part 1: Activating Tire Pressure Monitoring System Reset Mode
Note: Once your vehicle enters TPMS reset mode, the horn will sound once and a message will appear in the information display. If this does not occur, repeat the sequence.
- Place the ignition in the off position and keep the key in the ignition.
- Without starting the engine, turn your key to the ON position.
- Quickly switch the hazard flashers on then off 3x.
Part 2: Re-Training Your Tire Pressure Sensors
Note: If at any point in the re-training process two short horn beeps are heard, the reset procedure was unsuccessful. Please try repeating the sequence from PART 1: Activating TPMS Reset Mode.
- Decrease the air pressure in the driver-side front tire until the horn sounds once.
- Decrease the air pressure in the passenger-side front tire until the horn sounds once.
- Decrease the air pressure in the passenger-side rear tire until the horn sounds once.
- Decrease the air pressure in the driver-side rear tire until the horn sounds once.
- Turn the ignition off.
Will this procedure work on the Ranger?
Sponsored