RokBloks mud flaps… Post your pics!!

[760magneticranger]

Hi everyone, I’ve been going back and forth about wether or not to get some of the RokBloks mudflaps, specifically the XL ones for my bigger tires. I’d be interested in seeing how they look on you guys that have them trucks. So post some pics!

Sponsored

 

[Gumbo]

Not sure this helps, just rained so truck needs a bath badly. Considering the amount of mud etc that ends up on the inside of the flaps, I am extremely happy I bought them. These are the XL

 

[WhatDaHill]

I have the regular size on mine, and love how they keep the side clean. Judging by your tire size, the XL's would probably fit better and give you the added protection.

 

[760magneticranger]

I have the regular size on mine, and love how they keep the side clean. Judging by your tire size, the XL's would probably fit better and give you the added protection.

Okay cool thanks for the response! I was curious as to how the black with red symbol look too, I think I’m gonna go with those, in the XL

 

[RangerPNW]

Okay cool thanks for the response! I was curious as to how the black with red symbol look too, I think I’m gonna go with those, in the XL

Can second the black with red logos, its subtle but adds a nice bit of color. Don't have photos handy, but i have that setup (regular, not xl) on my silver ranger. That being said, i would recommend a little bit of locktite on the fasteners, after two years a few of mine have made a run for it.

 

[Boosted _Ranger_Mike]

 

[Boosted _Ranger_Mike]

I have the XL Rok Blokz on mine as well. I think they fit perfect in my opinion. Protects your paint! definitely can notice a before and after.

 

[TXRangerTim]

Can second the black with red logos, its subtle but adds a nice bit of color. Don't have photos handy, but i have that setup (regular, not xl) on my silver ranger. That being said, i would recommend a little bit of locktite on the fasteners, after two years a few of mine have made a run for it.

Your fasteners are hanging out with the 10mm crowd. They are a bad influence.

 

[TXRangerTim]

A new Tremor owner here added the standard size and they look good.

https://www.ranger5g.com/forum/threads/that-was-way-easier-1-tremor-level.24127/#post-548751

 

[WingShot]

It’s not really worth me taking a picture, there is only one left attached. Put the XL’s on and liked the look, may have helped reduce some of the rocks flying off the Grabbers. But it didn’t take much off-roading to rip them off. I can’t recommend them if you go 4-wheeling much.

 

[CO2Ranger]

It’s not really worth me taking a picture, there is only one left attached. Put the XL’s on and liked the look, may have helped reduce some of the rocks flying off the Grabbers. But it didn’t take much off-roading to rip them off. I can’t recommend them if you go 4-wheeling much.

I'm surprised you lost them. I have the XLs and have done tons of dumb stuff off-road. All 4 still firmly attached.

 

[WingShot]

What failed ? Fasteners pulled out ? Material tore ?

I’m guessing the fasteners pulled out on the front ones. The backing plates were still there but the flaps were never seen again. The rear one was still attached to the backing plate but it had pulled and popped off the bracket at the bottom.

 

[WingShot]

I'm surprised you lost them. I have the XLs and have done tons of dumb stuff off-road. All 4 still firmly attached.

Nothing I consider particularly dumb, but it’s taken me over a few of the high mountain passes in the area. If you find a black/black one on the trail somewhere, let me know!

 

[CO2Ranger]

Nothing I consider particularly dumb, but it’s taken me over a few of the high mountain passes in the area. If you find a black/black one on the trail somewhere, let me know!

Haha! Will do!

 

[renewedcaper]

My truck is in the install video. I like them a lot.

Sponsored