Radar Detector

[Pas6469]

Sorry if this is been talked about, but I am wondering if the location of my radar detector could interfere with lane keeping sensor? I don’t know if it’s me, but since I installed the detector, It seems like my lane keeping isn’t working correct from the left side. I’m hoping it’s just in my head. Does anybody else have their radar detector on this side, and do you have any issues? Thanks in advance.

Sponsored

 

[Cape Cruiser]

Sorry if this is been talked about, but I am wondering if the location of my radar detector could interfere with lane keeping sensor? I don’t know if it’s me, but since I installed the detector, It seems like my lane keeping isn’t working correct from the left side. I’m hoping it’s just in my head. Does anybody else have their radar detector on this side, and do you have any issues? Thanks in advance.

Mine is on other side and no issues for me .

 

[Megawatt]

You really don’t need to see it. Why not move to other side? Can’t the beep tone and speed of the beeps tell you what you would see on the display?

 

[Robisten8]

I wish I had a dollar for every ticket I've written to people with radar detectors! Good luck, but knowledgeable cops laugh at radar detectors!

 

[daniel3507]

I wouldn't expect it to interfere. The lane keeping system uses the camera that's mounted right next to your detector and can't be seen inside the truck. Unless there is some crazy electrical interference it shouldn't be a problem. You can always look into a blendmount if you think it's causing issues

 

[Pas6469]

You really don’t need to see it. Why not move to other side? Can’t the beep tone and speed of the beeps tell you what you would see on the display?

Yea, true, but I do like to see the display. Besides, I was thinking either side might cause an issue with interfering with the lane keeping sensor.

 

[Pas6469]

I wouldn't expect it to interfere. The lane keeping system uses the camera that's mounted right next to your detector and can't be seen inside the truck. Unless there is some crazy electrical interference it shouldn't be a problem. You can always look into a blendmount if you think it's causing issues

I wouldn't expect it to interfere. The lane keeping system uses the camera that's mounted right next to your detector and can't be seen inside the truck. Unless there is some crazy electrical interference it shouldn't be a problem. You can always look into a blendmount if you think it's causing issues

Yea, that’s what I was hoping. As far as the blend mount, I looked into it. There isn’t enough room between the mirror and base. The stem is too narrow. I tried the quarter test. No way it would fit.

 

[GTGallop]

I didn't realize Radar Detectors were still a thing.

 

[2020FRL]

Why not do the speed limit and actually drive the truck instead of letting the lane keeping drive for you ... Just curious

 

[aeroshots]

I wish I had a dollar for every ticket I've written to people with radar detectors! Good luck, but knowledgeable cops laugh at radar detectors!

I resemble that remark. Does standby-transmit-standby at night at a traffic light do anything for you????

 

[Langwilliams]

I just go 5 mph over on the side streets an not over 10 over on the highway an hope the cops let me slide while they wait for a real speeder with a radar detector.

 

[AzScorpion]

Mine is on other side and no issues for me .

Paul, have you tried taking it down to see if the LK is still off? I'd try that first and go from there. I have no need for a radar detector here because as long as you're going under 90 you're good!

 

[Ugly_Betty]

I wish I had a dollar for every ticket I've written to people with radar detectors! Good luck, but knowledgeable cops laugh at radar detectors!

GUARANTEED to get you a ticket for whatever I stopped you for when I see one.

 

[daniel3507]

@Pas6469 they do make one for our trucks. Unfortunately since it's such a small space you can't use an existing one if you had one.

 

[daniel3507]

https://blendmount.com/aluminum-rad...ax-360-max2-max-max-ii-specialty-5014-series/

Unfortunately for me it doesn't seem compatible with a V1

Sponsored