Just updated to Sync 3.4 on my Ranger 2019

[Hambone437]

Out of curiousity, does anyone have a pic of what the 3.4 home screen looks like?

This was 3.4 after updated from 3.3

Sponsored

 

[Tony Giordano]

This was 3.4 after updated from 3.3

Just curoius, what steps did you follow? Going to try this tonight if I can.

 

[UofMEngineer]

Done. My build is now 19274. Still having a rear camera issue

Not sure. I tried this on both my vehicles (admittedly older) and I don't see it. I am on newer software though.

 

[Hambone437]

Just curoius, what steps did you follow? Going to try this tonight if I can.

I downloaded and followed the directions from this site, as others had done and reported success.

https://cyanlabs.net/tutorials/update-ford-sync-3-2-2-3-0-to-version-3-4-all-years-3-4-19200/

 

[Hambone437]

Not sure. I tried this on both my vehicles (admittedly older) and I don't see it. I am on newer software though.

UPDATE

Issue with the camera has been resolved. I did a master reset and the camera delay function now works properly. Everything is now working flawlessly and I’m now running SYNC 3.4, build 19274.

 

[TylerV76]

Are 3d maps working for you? Not a big deal if they dont, just curious.

 

[Hambone437]

Are 3d maps working for you? Not a big deal if they dont, just curious.

Yup, 3D map function works. Did it not work for you?

 

[TylerV76]

Yup, 3D map function works. Did it not work for you?

I haven't done mine yet but Ive read a few folks in the past week or 2 complaining of this. Honestly Im a bit on the fence of doing this one. Ive done these before on my Mustang but Im hesitant on the Ranger.

The main thing holding me back is I cant remember how it works when the actual update drops. Do we do the upgrade like normal over top of this one since it will be a newer build number?

EDIT: File downloads have been suspended for the time being due to exceeding googles quota. I'll have to try again tomorrow or Sunday.

 

[outdoorphotog]

I downloaded and followed the directions from this site, as others had done and reported success.

https://cyanlabs.net/tutorials/update-ford-sync-3-2-2-3-0-to-version-3-4-all-years-3-4-19200/

I followed these directions but it looks like i got 3.4.19101. Seems to work well. I had to do the master reset for everything to work correctly too, prior to that i was stuck on the same XM radio channel, it wouldn't let me change it. Is there any reason or improvements to upgrade to 3.4.19274?

Edit: Version number

 

[Hambone437]

I followed these directions but it looks like i got 3.4.19101. Seems to work well. I had to do the master reset for everything to work correctly too, prior to that i was stuck on the same XM radio channel, it wouldn't let me change it. Is there any reason or improvements to upgrade to 3.4.19274?

Edit: Version number

I’m not sure what the difference was. I primarily updated to 19274 because I was having an issue with the backup camera and I thought the latest update would fix it. The problem was still there after the update to 19274 and only corrected when I did a master reset. Everything works as expected and I’m glad I updated.

 

[Sabasigh]

Ok i tried this and the boot USB gave me the red screen error. I put in the 2nd usb and got updated. How do i get to 19274?

Also, my FordPass App is stuck on Activation Pending. Believe i have already acknowedlged "Sync Connect" prompt on the truck. Have cycled numerous times, and unisntalled/reinstalled the app.

 

[RedlandRanger]

Ok i tried this and the boot USB gave me the red screen error. I put in the 2nd usb and got updated. How do i get to 19274?

Also, my FordPass App is stuck on Activation Pending. Believe i have already acknowedlged "Sync Connect" prompt on the truck. Have cycled numerous times, and unisntalled/reinstalled the app.

For the activation pending issue, I would try a system reset.

To upgrade to 19274 there is another file on the site referenced earlier. It is basically repeating the upgrade with a new file, minus the reformatting done in the first step.

 

[outdoorphotog]

I’m not sure what the difference was. I primarily updated to 19274 because I was having an issue with the backup camera and I thought the latest update would fix it. The problem was still there after the update to 19274 and only corrected when I did a master reset. Everything works as expected and I’m glad I updated.

OK, Ill try to update to the newest when i get home today.

 

[Sabasigh]

For the activation pending issue, I would try a system reset.

To upgrade to 19274 there is another file on the site referenced earlier. It is basically repeating the upgrade with a new file, minus the reformatting done in the first step.

Sorry forgot to mention a master reset was the 1st thing i did after it came up after upgrade.

*Ok, i removed my vehicle from teh Ford pass app and re-added it.

 

[outdoorphotog]

On the F150 site i noticed they released 3.4.20021. I just upgraded from 3.4.19101 to 3.4.20021 and it does work. Not sure what the differences are, i had some weird stuff happen with Waze in 19101 but not sure if thats fixed yet. With this autoinstall.lst file:

[SYNCGen3.0_3.4.20021]
Item1 = 5U5T-14G381-EB_1581452369000.TAR.GZ
Open1 = SyncMyRide\5U5T-14G381-EB_1581452369000.TAR.GZ
Options = AutoInstall,Delay

https://redirect.viglink.com/?forma...ivsubinaries.azureedge.net/s...2369000.TAR.GZ

Sponsored