Sponsored

Icon leaf dprings

litalien26

Active Member
First Name
Carl
Joined
Sep 15, 2020
Threads
4
Messages
43
Reaction score
123
Location
Valleyfield, Qc
Vehicle(s)
Ford Ranger FX4 2020 / Ford Galaxie 1968
Occupation
Peace officer
How much lift does the tremor leaf’s offer? I need 1.2-1.5 of lift in the rear to equal my 3.5 lift up front.
I use BDS rear shackle for my truck, advertised at 1 inch but gave me 1.1 on both side.
20210427_180847.jpg
Sponsored

 

Whiplash

Well-Known Member
First Name
Kern
Joined
Oct 17, 2021
Threads
2
Messages
270
Reaction score
848
Location
The southwest Missouri Ozarks
Vehicle(s)
2021 Ranger XLT FX4 / 2004 Mazda RX8
Occupation
Retired
I have the Icon progressive leaf
20211215_104640.jpg
20211215_104323.jpg
springs on my truck..installed as shipped without swapping out , or adding the extra spring...initially it added 1.25" lift height , significantly more than the advertised 3/8"...I drove around with 350 lbs of sand bags in the bed for a while to help the springs "settle"....500 miles later they settled at 3/4" higher than stock height... Also have the Icon 2.5 coil overs in the front, with the adjustable collar, so I turned them up to 3" of lift to re-level... I am a believer in matching same brand components when possible ...I"m pretty sure Icon tested the shocks, struts and springs together for compatibility...giving me a close to tuned suspension without me going thru all trial and error if I was doing it myself..
20211215_103407.jpg
 
 








Top