FORScan Modifications

[spike36ff]

Added the frost telltale and it seemed to make my clock on dash disappear. I just have four little dashes?? Do you think this releated?

Sponsored

 

[RedlandRanger]

Added the frost telltale and it seemed to make my clock on dash disappear. I just have four little dashes?? Do you think this releated?

I added that a while back and it works fine. Seems to come on when the temp is under 39 or 40. I've had no issues with my clock after making the change.

 

[toddiscdn]

Ive had the clock disappear a couple times after forscan mods, Go into the sync screen and set or reset time there and it will come back.

 

[spike36ff]

Ive had the clock disappear a couple times after forscan mods, Go into the sync screen and set or reset time there and it will come back.

When you say sync screen you mean in the settings on the radio right?

 

[Hambone437]

Ive had the clock disappear a couple times after forscan mods, Go into the sync screen and set or reset time there and it will come back.

Yes, that’s what I found I need to do to bring the time display back.

 

[Hambone437]

When you say sync screen you mean in the settings on the radio right?

Yes, that’s what he was referring to.

 

[spike36ff]

Thanks guys

 

[spike36ff]

Yes, that’s what he was referring to.

Thanks gentlemen it worked.

 

[Andy]

Anyone know if we can lower the minimum speed on trail control? From 1 MPH to .5 MPH?

I’ll ask the tuner as well. Not sure if it’s possible.

 

[RedlandRanger]

Anyone know if we can lower the minimum speed on trail control? From 1 MPH to .5 MPH?

I’ll ask the tuner as well. Not sure if it’s possible.

I believe 0.5 is only available in low range. Low range is 0.5 - 10 MPH in 0.5 MPH increments. High Range is 1-20 in 1 MPH increments. I would be surprised if you could change that.

 

[Andy]

I believe 0.5 is only available in low range. Low range is 0.5 - 10 MPH in 0.5 MPH increments. High Range is 1-20 in 1 MPH increments. I would be surprised if you could change that.

The increments in low are .5 but it starts at 1.0 MPH and will not go lower than that. I haven’t tried it in the terrain modes but in 4Lo its 1.0.

 

[MT19RANGER]

I believe 0.5 is only available in low range. Low range is 0.5 - 10 MPH in 0.5 MPH increments. High Range is 1-20 in 1 MPH increments. I would be surprised if you could change that.

Nice to know, I'll have to test 4L.

 

[RedlandRanger]

The increments in low are .5 but it starts at 1.0 MPH and will not go lower than that. I haven’t tried it in the terrain modes but in 4Lo its 1.0.

Are you sure? I swear I saw it start at 0.5 when I was playing around with it a while back. Maybe I was doing terrain mode instead of just 4 lo?

 

[Andy]

Are you sure? I swear I saw it start at 0.5 when I was playing around with it a while back. Maybe I was doing terrain mode instead of just 4 lo?

I’ll play with it after work. I tried it this morning in just 4Lo and it would go no lower than 1.0 MPH

 

[RagonkP1]

I just installed a Start-X remote start kit on my ‘19 STX with keyed ignition. I highly recommend this kit for anyone looking. Very quick and easy install and functions as advertised, unlike other kits out there.

Has anyone figured out the procedure to override the factory “auto” setting for the climate control when using remote start and get the vehicle to retain the “last setting” using Forscan?

Sponsored