Opusnbill7
Well-Known Member
I've searched, but haven't seen a good analysis of where the % charge should be set for the AGM batteries. I've changed some other settings but not that one.For at least 6 months I had the ASS system disconnected at the battery. Everything worked fine and battery was always at full charge and S/S was eliminated.
Got Forscan setup and went to town. Turned off S/S in software and reconnected the battery connection. The other change I made in Forscan is percentage of battery charge. Factory has it set to 75% of full charge. I changed that to 90% and haven’t had a problem since.
Got to say Forscan is the way to go! Allows you to change many other things that you really can’t so easily any other way.
Why did you choose 90% and how did you determine that was the right value, just out of curiosity? I haven't had any problems with the battery running out of power or anything, I mainly want to maintain its life as long as possible before replacement.
Sponsored
Last edited:
. I totally forgot about the a/s/s because the a/c was blasting since I bought it. Bought the LED nightlight and don't even think about it anymore.