Jayven
Member
- Joined
- Sep 11, 2019
- Threads
- 0
- Messages
- 5
- Reaction score
- 4
- Location
- Atlanta, GA
- Website
- www.heavendesignsllc.com
- Vehicle(s)
- 2019 Ford Ranger XLT Sport 4x4
- Occupation
- Engineer
OUR TRIM RINGS HAVE ARRIVED!
Couple of things to note:
· The gray is lighter than I was expecting. Apparently, all the other prototypes I ever got from this 3D printer/material were dyed black.
· If you don’t like the medium gray color, you can dye or paint them to whatever color you want.
· If you do want to paint them to match your exterior color, you need to go to the Ford parts department and get the touch up pen for $20. Brush on the paint and let dry, and then cover with the acrylic seal and let dry. I would mask off the inner diameter (touches the ignition) and the outer diameter (touches the dash).
I am now going to get started on mailing these trim rings! These are small enough to fit in a flat envelope, so I won’t be able to provide tracking. I will take a confirmation picture of your stamped envelope.
Please make sure you email [email protected] any questions, comments, or concerns. If you love our product, then please post on message boards, social media, and tell a friend. I hope you like your Ford Ranger 2019 XL and XLT Trim Ring Bezel.
As a reminder, here is the PayPal link to purchase your Trim Ring for $15!
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=5TUDTMGAL7J5A
Couple of things to note:
· The gray is lighter than I was expecting. Apparently, all the other prototypes I ever got from this 3D printer/material were dyed black.
· If you don’t like the medium gray color, you can dye or paint them to whatever color you want.
· If you do want to paint them to match your exterior color, you need to go to the Ford parts department and get the touch up pen for $20. Brush on the paint and let dry, and then cover with the acrylic seal and let dry. I would mask off the inner diameter (touches the ignition) and the outer diameter (touches the dash).
I am now going to get started on mailing these trim rings! These are small enough to fit in a flat envelope, so I won’t be able to provide tracking. I will take a confirmation picture of your stamped envelope.
Please make sure you email [email protected] any questions, comments, or concerns. If you love our product, then please post on message boards, social media, and tell a friend. I hope you like your Ford Ranger 2019 XL and XLT Trim Ring Bezel.
As a reminder, here is the PayPal link to purchase your Trim Ring for $15!
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=5TUDTMGAL7J5A
Sponsored