Biggest tires, no lift?

[Loweredon33s]

Those look really good also, I'm really fond of tires that fill the wheel well a lot.
I put the 2.5" leveling kit on my truck, I've just been trying to find a good fitting tire setup that I at least don't have to, uh bent the core support lol

My truck is lowered 2.5/5” if you’re lifting it you won’t have those problems.

Sponsored

 

[David530]

My truck is lowered 2.5/5” if you’re lifting it you won’t have those problems.

Gotcha, so you think I could fit 285/65/ *17* without having to modify too much stuff?

 

[Loweredon33s]

Gotcha, so you think I could fit 285/65/ *17* without having to modify too much stuff?

Yeah, everyone does that.

 

[Wytchdctr]

Gotcha, so you think I could fit 285/65/ *17* without having to modify too much stuff?

If those would work at stock height with the crash bars in place; I'd like the extra width when the LE3s are toast. I'd be surprised if it does based on how much room I have at full lock with the 10.4 inch wide tire vs 11.2 inches. I might or am likely wrong.. I didn't get a measuring tape out to check clearance. You might have zero problems. I just made sure I was good when i turned the wheel all the way. The internet was right about zero issues with the 265/70R17s.

But... I just spent most of the day outside and don't want to touch a black truck that is probably close to the surface of the sun in temp. It hasn't moved today. Might break out a ruler, tape, or pictures tomorrow.

 

[David530]

Yeah, everyone does that.

Okay, you're the first person I've seen put that big of a tire on these Rangers so I just wanted to make sure, wasn't wanting to go to the tire shop and have them try out like 3 different size tires lol, thanks buddy

 

[David530]

If those would work at stock height with the crash bars in place; I'd like the extra width when the LE3s are toast. I'd be surprised if it does based on how much room I have at full lock with the 10.4 inch wide tire vs 11.2 inches. I might or am likely wrong.. I didn't get a measuring tape out to check clearance. You might have zero problems. I just made sure I was good when i turned the wheel all the way. The internet was right about zero issues with the 265/70R17s.

But... I just spent most of the day outside and don't want to touch a black truck that is probably close to the surface of the sun in temp. It hasn't moved today. Might break out a ruler, tape, or pictures tomorrow.

Yeah I'm looking some something bigger than 265/70, if I can stuff 285/65/17s under it without major cutting or bending I'm going to. to be honest your reply only halfway made sense to ,me lol

 

[Wytchdctr]

your reply only halfway made sense to ,me lol

Half my posts are broken up into bits before I hit post. I should just wait until I get on the computer at night. I have a fleet.. herd.. flock of kids.. what is the right word for 8 of them? So yeah. I get asked a question or get a request for help about every 45 seconds. This post was in two parts for the same reason.

I went into HR because I run HR at home. My kids just act better than the adults at the other job.

I need to add a disclaimer to the signature about this instead of talking crap about Chrysler..

 

[David530]

I have a fleet.. herd.. flock of kids.. what is the right word for 8 of them

I would call that a clusterfuck

 

[Loweredon33s]

Okay, you're the first person I've seen put that big of a tire on these Rangers so I just wanted to make sure, wasn't wanting to go to the tire shop and have them try out like 3 different size tires lol, thanks buddy

You will need to clearance for them regardless but being lifted is a bit different than lowered.

 

[David530]

You will need to clearance for them regardless but being lifted is a bit different than lowered.

yeah defiantly, if you are lowered and fit that size I don't really see me having a problem since I'm up 2.5"

 

[Loweredon33s]

yeah defiantly, if you are lowered and fit that size I don't really see me having a problem since I'm up 2.5"

It won’t just fit though, the wheels will dictate how much you have to clearance.

 

[Loweredon33s]

It won’t just fit though, the wheels will dictate how much you have to clearance.

yeah defiantly, if you are lowered and fit that size I don't really see me having a problem since I'm up 2.5"

This is how it looked with a level lift on it btw

 

[David530]

This is how it looked with a level lift on it btw

Very nice

 

[David530]

It won’t just fit though, the wheels will dictate how much you have to clearance.

I understand that, but what I meant was just that I won't have to modify as much as you did with your truck lowered.

 

[Doc]

So what/how much did you have to cut, bend and remove?
because I don't think anyone can get a more perfect look, this is the size I'm gonna cram on my tuck from just seeing yours lol

Nice, I like it when the wheel fits the wheel well

Sponsored