Remote Transmission Dip Stick Aftermarket Support?

[RazzleRanger]

The only info we have on each other is our 5G identity, I will send out PM's.

So, please be good with how I do this, I have mentioned before, that I was unaware of the voting list and how it's random anyways, I needed to come up with something.

So, the easiest and most logical list, was simply: the order of posts requesting one.

It's the order that is easiest to follow, it's straight forward, and it's viewable, I'm sure there are people who voted early and never posted anything, to those I apologize, and there are people who didn't make it crystal clear but I included.

There is a very important second reason for handling it this way, in those first 20+ pages of post, is the very thing that motivated me through this project, all those positive comments set me on a path.

The encouragement was enough for me to do it properly, start a business, get everything in place, meet all requirements, register to all kinds of stuff, set up accounts, pay all fees, it's gnarly, but a good experience as well.

Thanks to everyone.

So back to business, I will send out group PM's soon, let me know if you are still interested.

I think this batch should be 27 assembly's, time to get busy, middle of next week hopefully, and I'm still not done with the instructions.

Go figure.. water heater started leaking, "building hoses today? no, I'm a plumber today"

Only got a handful of them, not the whole order, time to get to work.

I was stoked to find out they were all within less than an 1/8 of an inch from each other.

I will only have 20ish to go out, I don't have the instructions done yet

Sponsored

 

[RazzleRanger]

I’ll wait until notified by MBS that mine is ready! Can’t wait!

 

[Justin87]

I definitely will buy one. Please let me know when I can. Thank you.

 

[redneck wrencher]

Patiently waiting. You can't rush perfection! ? You are going above and beyond to give us the best of best. Who could ask for more?

 

[Fitzmotor]

Finally under way, got 6 of them done yesterday, trial fit one for quality control, fits as expected.

It is nice to finally be at the actual production point, it's been a long road, hopefully the second half of the order will be here before I'm done with these.

Everything is working well, the heating, shaping and cooling is all going smoothly, just crank up the compressor, heat guns and the radio and go to work, it feels really good to just get to it, getting them done one at a time, Wahoo!! About damn time!

 

[2021Ranger]

Wow that looks fantastic. Fitz the time you spent making it right is well worth it now that you can see the finished product..
great job!!!!!

 

[r_garibay]

Looking real good!

 

[Blue Streak]

Finally under way, got 6 of them done yesterday, trial fit one for quality control, fits as expected.

It is nice to finally be at the actual production point, it's been a long road, hopefully the second half of the order will be here before I'm done with these.

Everything is working well, the heating, shaping and cooling is all going smoothly, just crank up the compressor, heat guns and the radio and go to work, it feels really good to just get to it, getting them done one at a time, Wahoo!! About damn time! View attachment 195444 View attachment 195445

???

 

[Essthreetee]

Holy smokes Fitz…I am now officially excited.
I can’t wait until I get my email from you!!!
Thanks again.

 

[Hoddad]

Looks fantastic!

 

[Cabose-1]

Getting my cash ready. Paypal, cashapp, check!!?? This is a nice job

 

[Dr. Zaius]

I just went and checked, and while my first post in this thread saying that I wanted one came well after my response to the poll, and well after 27 posts in, I want to point out that I did submit a very strong Like very early on.

Therefore I identify as one of the first requestors. ?

That works here, right?

If it helps I will also identify as a non-binary transgender if it gets me further up the list.

Until I get it.

Then I will revert to my old ways of being a white christian male that is the cause of all societal problems.

But then I will be able to easily check my transmission fill level, which will solve at least one of society's problems! ?

 

[Msfitoy]

Finally under way, got 6 of them done yesterday, trial fit one for quality control, fits as expected.

It is nice to finally be at the actual production point, it's been a long road, hopefully the second half of the order will be here before I'm done with these.

Everything is working well, the heating, shaping and cooling is all going smoothly, just crank up the compressor, heat guns and the radio and go to work, it feels really good to just get to it, getting them done one at a time, Wahoo!! About damn time! View attachment 195444 View attachment 195445

??

 

[Grumpaw]

Getting my cash ready. Paypal, cashapp, check!!?? This is a nice job

I do remember he said in a post awhile back he'd take booze as payment....
I have a 6 pack of Bud Light ready to send him !!!

 

[Msfitoy]

I do remember he said in a post awhile back he'd take booze as payment....
I have a 6 pack of Bud Light ready to send him !!!

You'd have to pay him $20 rebate...that would make your price $199 + ship/handling...

Sponsored