What did you do to your Ranger today?

[Venom_z89]

Welp I got the down pipe installed the exhaust I made modified now with vbands both after cat and before muffler so I can do tone changes rather quick if I feel like it. 3 inch exhaust off turbo all the way out.

first video is with muffler second is just resonator. total for my exhaust set up with used afe down pipe im at 467 usd.

that's also with 3 dollar o2 sensor spacer from temu stainless steel and just as a fyi if anyone is looking for thread pitch it's m18x1.5 npt

Sponsored

 

[Stevedbvik1]

I let the Ranger sit in the driveway while the newly applied Krown spray did it’s runoff thing. It will sit there most of the week until it “drys” up. Then back to parking in the garage

 

[Venom_z89]

? But these days, you may not come back alive!

This was taken out in Mexico, and as you can see I was out in desert Mobbing in it.

 

[subquark]

Took the ford badge from hood protector and hot glued it to my $2 manual pouch to make it all official-like.

@subquark

That's pretty slick! Undoing all of Ford's decontenting is a seemingly never ending pursuit!

Very nicely done!

 

[RedDakooter05]

That's pretty slick! Undoing all of Ford's decontenting is a seemingly never ending pursuit!

Very nicely done!

It's our job to make our trucks actually reflect the MSRP I guess.

 

[subquark]

It's our job to make our trucks actually reflect the MSRP I guess.

MSRP
Manufacturer Suggests Replacing Parts

 

[RedDakooter05]

MSRP
Manufacturer Suggests Replacing Parts

Hah good one. Pretty accurate in fords case too.

 

[Venom_z89]

MSRP
Manufacturer Suggests Replacing Parts

manufacturers seducing raping people

 

[Justin says...]

I washed it. There is only 1 mod I want to do which is a level but I'm not too sure what to purchase. Do I replace the front shocks with BIlsteins to level it or do I just buy the spacers and have someone install?

 

[Sal0341]

Washed the winter away enjoying the spring like weather.

 

[Bob902]

I washed it. There is only 1 mod I want to do which is a level but I'm not too sure what to purchase. Do I replace the front shocks with BIlsteins to level it or do I just buy the spacers and have someone install?

My suggestion is skip the spacers and do either Bilstein or Eibach.

 

[AndyMedic]

Set my preload on my BP-51’s for the front bumper winch and skid plates. Laid out the front bumper, made sure I had all the pieces and cleaned all the metal before fabrication begins next week most likely.

 

[Glocker]

I washed it. There is only 1 mod I want to do which is a level but I'm not too sure what to purchase. Do I replace the front shocks with BIlsteins to level it or do I just buy the spacers and have someone install?

I second the Eibachs. For the same effort to get someone to install Spacers, you can get the Eibachs installed (at, admittedly, a higher price for the equipment)and have more range for height. for instance, I have my Eibachs set to max lift of 3.5".

 

[lukdeg]

today, I installed a set of sequential led turn signal for mirrors,
a upfitter switch
also installed ditch light brackets,
and Strands ditch lights
now, beer time!
https://www.amazon.ca/dp/B0912LG615?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.ca/Nirider-6-Gan...648&sprefix=upfitter+swi,aps,160&sr=8-46&th=1
https://www.amazon.com/dp/B08XQL7GDW?ref=ppx_yo2ov_dt_b_product_details&th=1
https://strandseurope.com/product/siberia-qbqube-light-work-light-led/

 

[PltFX4]

I did what I think will be come a standard for all Rangers, much like the damper... the shift knob jacket!! We can't have heated steer wheel, but can have a warm shift hand.

Let me know if you need a link... rockon:)

Sponsored