What did you receive in the mail today for your Ranger?

[onemanlan]

Yeah great stuff, I had ordered the chrome bolt before buying my ranger. Then got it home and realized there's no chrome lettering on the tailgate like every other car ever haha.

If you do enough LSD it'll all be chrome, my man. Probably shouldn't drive then... wait for it to pass. Enjoy the ride

Sponsored

 

[AndyMedic]

Wolf Haus blank pigtail

 

[TVRangerSTX]

Got my Audew Jump Starter today. The way our batteries are and already having mine replaced within 2 years it's a good handy device to have. If you register on their site there's usually another 10% off coupon from the drop down menu when you click on your name.

Thanks for this, Dave...ordered one today, with the discount was around $67...I've had several of these over the years, big clunkers, when I needed them, dead as a boat anchor. Was at Harbor Frt the other day and almost bought theirs...glad I didn't after I saw your video comparison. Now you got me with 2 things I didn't know I needed, damper 2 yrs ago, and now jumper! T-shirt??

 

[AzScorpion]

Thanks for this, Dave...ordered one today, with the discount was around $67...I've had several of these over the years, big clunkers, when I needed them, dead as a boat anchor. Was at Harbor Frt the other day and almost bought theirs...glad I didn't after I saw your video comparison. Now you got me with 2 things I didn't know I needed, damper 2 yrs ago, and now jumper! T-shirt??

Glad I could help spend your money Trevor. lol It has a nice case with it so you can store it with other gear and not have to worry about it getting damaged. No t shirts just yet but maybe some 303 ones would be a good idea. ?

 

[THLONE]

Thanks for this, Dave...ordered one today, with the discount was around $67...I've had several of these over the years, big clunkers, when I needed them, dead as a boat anchor. Was at Harbor Frt the other day and almost bought theirs...glad I didn't after I saw your video comparison. Now you got me with 2 things I didn't know I needed, damper 2 yrs ago, and now jumper! T-shirt??

Glad I could help spend your money Trevor. lol It has a nice case with it so you can store it with other gear and not have to worry about it getting damaged. No t shirts just yet but maybe some 303 ones would be a good idea. ?

Dave has not found any t-shirts small enough for Damper people. So, you need to polish your truck with 303 everyday to build up your muscles.

 

[KJRR]

Thanks for this, Dave...ordered one today, with the discount was around $67...I've had several of these over the years, big clunkers, when I needed them, dead as a boat anchor. Was at Harbor Frt the other day and almost bought theirs...glad I didn't after I saw your video comparison. Now you got me with 2 things I didn't know I needed, damper 2 yrs ago, and now jumper! T-shirt??

Welcome to Dave's @AzScorpion Ranger shopping network. We'll sell you things you didn't know you need.
Here's your t-shirt

 

[D Fresh]

Well I think I settled on 7. I ordered another couple of pairs for my bumper and to have a spare on hand. They should be here Saturday...

My front panel has that hole smack dab in the middle which will make alignment and spacing a breeze.

Good choice!


I got this in today. Part of my slow repair/upgrade process from the uninsured driver that hit me. Truck doesn't go to the body shop till late May, so I'm slowly collecting parts for the part of the repairs I'll be doing.

I lucked out on timing. Got it ordered before the 65% proce increase, and also got the "newer" style of tabbing on it.

Should work out great. Between the ACC module and required front plate, bar/light mount options are slightly limited for me. I'll mount the plate to the SVC bar and everything should be out the way for the ACC module. If not I'll relocate, probably using CaliRaised's bracket as it seems to offer the most value.

Note: SVC's packaging was awesome, bar was well protected. Shipped on time with no problems. Bar is well made and finished nicely. I won't hesitate to use SVC again.

 

[Bdubjax]

Switchplate

 

[AndyMedic]

Switchplate

Where from?

 

[OFC Ranger]

Good choice!

I got this in today. Part of my slow repair/upgrade process from the uninsured driver that hit me. Truck doesn't go to the body shop till late May, so I'm slowly collecting parts for the part of the repairs I'll be doing.

I lucked out on timing. Got it ordered before the 65% proce increase, and also got the "newer" style of tabbing on it.

Should work out great. Between the ACC module and required front plate, bar/light mount options are slightly limited for me. I'll mount the plate to the SVC bar and everything should be out the way for the ACC module. If not I'll relocate, probably using CaliRaised's bracket as it seems to offer the most value.

Note: SVC's packaging was awesome, bar was well protected. Shipped on time with no problems. Bar is well made and finished nicely. I won't hesitate to use SVC again.

I'm going to drill directly into my bumper (magnetic gray) and install four more Hella's between those two air vent things. If I take them out a couple of black rubber grommet plugs will work fine. I plan to paint my front and rear bumper satin black anyhow in near future to match the rest of the black on my truck.

The cool thing is the natural curve of the bumper will give me some outward projection.

Pardon the sunlight laser beam that photo bombed me.

 

[DukeCanBuildit]

I'm going to drill directly into my bumper (magnetic gray) and install four more Hella's between those two air vent things. If I take them out a couple of black rubber grommet plugs will work fine. I plan to paint my front and rear bumper satin black anyhow in near future to match the rest of the black on my truck.

The cool thing is the natural curve of the bumper will give me some outward projection.

Pardon the sunlight laser beam that photo bombed me.

For those of you seeing Jack’s truck for the first time, he completely disassembles his Ranger and puts it back together at least once a month. I would add a winking smiley emoji but I’m really not kidding.

 

[OFC Ranger]

For those of you seeing Jack’s truck for the first time, he completely disassembles his Ranger and puts it back together at least once a month. I would add a winking smiley emoji but I’m really not kidding.

As if I needed a reminder...

 

[D Fresh]

I'm going to drill directly into my bumper (magnetic gray) and install four more Hella's between those two air vent things. If I take them out a couple of black rubber grommet plugs will work fine. I plan to paint my front and rear bumper satin black anyhow in near future to match the rest of the black on my truck.

The cool thing is the natural curve of the bumper will give me some outward projection.

Pardon the sunlight laser beam that photo bombed me.

Good idea.

If it weren't for my required front plate I'd consider that. The factory plate mount takes up much of that room, there'd maybe be enough left for two.

With my plan of having the bar holding the plate as well, it might be an option. In case I need a second tier or more stabilization.

Side lighting can be difficult in our trucks without pillar mounts, which I really don't like. I've considered surface mounting some small pods, BD S1 ish, in the bumper behind the factory fog pockets. But with the bar I should have some flexibility.

I'm a slow modder. I might have my lights figured out by fall.

 

[D Fresh]

For those of you seeing Jack’s truck for the first time, he completely disassembles his Ranger and puts it back together at least once a month. I would add a winking smiley emoji but I’m really not kidding.

I think it's probably closer to once a week. Dude is a hustler.

 

[OFC Ranger]

Good idea.

If it weren't for my required front plate I'd consider that. The factory plate mount takes up much of that room, there'd maybe be enough left for two.

With my plan of having the bar holding the plate as well, it might be an option. In case I need a second tier or more stabilization.

Side lighting can be difficult in our trucks without pillar mounts, which I really don't like. I've considered surface mounting some small pods, BD S1 ish, in the bumper behind the factory fog pockets. But with the bar I should have some flexibility.

I'm a slow modder. I might have my lights figured out by fall.

I've got some ditch light brackets installed, I've been researching some small (think 2-3" max) spot pods to go on them. I have a bit of OCD so my old ditch lights didn't really go with the theme of the round off-road lights.

Sponsored