What did you do to your Ranger today?

[Ugly_Betty]

Painted my bed divider after cutting it in half and putting hinges on it. Now I can put it in and remove it without having to roll the tonneau back. Was gonna add some d-rings but decided to just drill holes every 6” and make some paracord loops that I can place where I need.

Sponsored

 

[OFC Ranger]

I finally got around to doing a 303 Graphene coating. So that was nice.

Also I was tinkering around with ways to widen my reverse lighting capability. I kind of came up with an unconventional install by placing some spare floods pods I have in a vertical position so I could angle them at about 30 degrees outward. Tested last night worked pretty damn good. At first I thought it looked a little odd and I am still debating taking them down, but sort of growing on me. Pardon the mess of wires, I have a shipment of electrical supplies and 100ft of mesh loom coming in tomorrow.

Still working on corner mending bracket designs to close up those panel gaps. Just have not been happy with ideas so far.

 

[Tracy Bowman]

I’ve never tried it but I’ll look for it in the supermarket ..
Thanks ..

It’s very good.

 

[dmeyer302]

We had a driving lesson, she dumped the clutch and hopped a couple curbs but it’s a good thing the truck is tough.

JK (obviously I hope), the tables at Chipotle were disgusting so we ate in the truck.

 

[Tracy Bowman]

We had a driving lesson, she dumped the clutch and hopped a couple curbs but it’s a good thing the truck is tough.

JK (obviously I hope), the tables at Chipotle were disgusting so we ate in the truck.

Precious!!!

 

[Chris M]

I finally got around to doing a 303 Graphene coating. So that was nice.

Also I was tinkering around with ways to widen my reverse lighting capability. I kind of came up with an unconventional install by placing some spare floods pods I have in a vertical position so I could angle them at about 30 degrees outward. Tested last night worked pretty damn good. At first I thought it looked a little odd and I am still debating taking them down, but sort of growing on me. Pardon the mess of wires, I have a shipment of electrical supplies and 100ft of mesh loom coming in tomorrow.

Still working on corner mending bracket designs to close up those panel gaps. Just have not been happy with ideas so far.

Your ride is at this point nothing short of an engineering marvel. Impressive stuff going on inside your head!

 

[JohnnyO]

Washed it after cutting and bagging the grass and taking it to the grass dump. Then took it to show my gearhead cousin who has been back and forth with cancer the past year and hasn't left the house much because of chemo, Covid, etc. He liked it and handed me a tape measure to see if one would fit in his garage (his full-size Chevy is too tall and has to sit out). It'll be close but with a shorter radio antenna like I got it might fit.

 

[Chris M]

Washed it after cutting and bagging the grass and taking it to the grass dump. Then took it to show my gearhead cousin who has been back and forth with cancer the past year and hasn't left the house much because of chemo, Covid, etc. He liked it and handed me a tape measure to see if one would fit in his garage (his full-size Chevy is too tall and has to sit out). It'll be close but with a shorter radio antenna like I got it might fit.

Amazing how many of us are having to take garage size into consideration when buying our next vehicles!
Good call on hanging with your friend. I'm sure he's thankful for the company!

 

[DukeCanBuildit]

I just finished installing my DIY bed divider.

DIY? Sure, if you’re a 3D printer ninja. That’s a great divider! Just the answer for the holes from those “missing” tie-downs we hear so much about. Good job!

 

[OFC Ranger]

Your ride is at this point nothing short of an engineering marvel. Impressive stuff going on inside your head!

You are too kind. My biggest problem with any idea is applying it so in the end it at least comes off looking half-way professional. I've had some really cool ideas that actually work, but were scrapped because I could not get it implemented without coming off as an 8th grader in metal shop class.

When I can't get the materials to look proper I sometimes do the sneaky trick of hiding the mess away from prying eyes. Like using solid paneling to hide something.

Everything is mechanically sound, just sometimes very very ugly.

 

[Mastodon]

I would be very interested in buying a set of brackets from you. This is genius.

Talk to me in June or July. Parts feel solid, but want to get some miles on them, take them through a car wash, and expose them to the Las Vegas summer before I offer anything to the masses. Especially for money. Would hate to sell something that only looks good and isn’t really functional. That’s just not good business.

 

[revbevis]

Great Looking Truck!

I had a question about one of your mods . . . the visor with the garage door opener. Did you have to do any electrical work or was the wiring harness already under the headliner for the visor with the light and garage door opener. I'm guessing you purchased the Lariet sun visor w/garage door opener. I have a 2021 Ranger XLT and would like to add the visor with the garage door opener as well.

Thank You in advance for any information you have to share!

You have to tap into the wiring under the cover in the middle of the windshield, drill a hole in a support and fish wiring above the headliner to the mounting hole for the visor. There is a thread about it on here somewhere.

 

[P. A. Schilke]

Hi Folks,

Today I let my Ranger smash a bunch of bugs on the windshield. It did a good job of it and tomorrow is probably a Car Wash day....

best,
Phil Schilke
Ranger Vehicle Engineering
Ford Motor Co. Retired

 

[Sailor]

Loaded my wife's summer tires to my buddies house and changed out the winter tires on her fusion hybrid. Then enjoyed AAA rib eye steaks ( the king of steaks IMO ) on the bbq seasoned with nothing more than salt and pepper lol.

 

[Chappy]

Talk to me in June or July. Parts feel solid, but want to get some miles on them, take them through a car wash, and expose them to the Las Vegas summer before I offer anything to the masses. Especially for money. Would hate to sell something that only looks good and isn’t really functional. That’s just not good business.

I hear you and sounds good.

One thought. If you make the ends where they are open on the top where a piece of wood can slot in, It would allow for quick removal while leaving the ends bolted to the sides of the bed. Maybe a Mark II prototype?

Sponsored