Tie downs

[JoeonerNYC]

Has anyone tried these?
Found these guys on eBay and they’re MUCH cheaper than the Oem ones. Look similar, but there’s no telling once you get them.

But for around 15$ i just might try.

https://www.ebay.com/itm/3943891501...HHZGSe3QP2&var=&widget_ver=artemis&media=COPY

Sponsored

 

[MY23RANGER]

I can get you the OEM ford units for 20 bucks

 

[Friday yet?]

If you are using them just for looks, fine. For cargo securement? No way. You've no idea as to load capacity. Probably just cheap Chinese knockoffs.

 

[jsphlynch]

Asides from concerns about how robust they are, I place the odds that they are sized correctly for the hole spacing or that the bolts are the right size at somewhere between slim and none.

 

[JoeonerNYC]

Was going to put them to work. said steel but too many factors so it’s a crapshoot.
that being said I’m going with MY23RANGERs offer and going OEM.

 

[Iowa Guy]

Has anyone tried these?
Found these guys on eBay and they’re MUCH cheaper than the Oem ones. Look similar, but there’s no telling once you get them.

But for around 15$ i just might try.

https://www.ebay.com/itm/3943891501...HHZGSe3QP2&var=&widget_ver=artemis&media=COPY

are they the same bolt size, and is the spread between the holes the same?

 

[subquark]

Has anyone tried these?
Found these guys on eBay and they’re MUCH cheaper than the Oem ones. Look similar, but there’s no telling once you get them.

But for around 15$ i just might try.

https://www.ebay.com/itm/3943891501...HHZGSe3QP2&var=&widget_ver=artemis&media=COPY

They don't look nearly as beefy and those bolts are Philips head? They don't look strong either, look like you'd twist them right off.

The stock tie downs feel solid (maybe even hardened?) and the bolts are of a heavy grade,.

 

[Peragrin]

Has anyone tried these?
Found these guys on eBay and they’re MUCH cheaper than the Oem ones. Look similar, but there’s no telling once you get them.

But for around 15$ i just might try.

https://www.ebay.com/itm/3943891501...HHZGSe3QP2&var=&widget_ver=artemis&media=COPY

take a closer look, they use a wrong ranger model in the picture, and the description reads universal for any pickup truck.

They won't thread in and the spacing is most likely wrong.

 

[P-38Ranger]

The bolts of the Ranger are M6, I spent more than that at Home Depot for four of them, and then bought chain for a solution that somebody else posted here.

 

[BS67]

The bolts of the Ranger are M6, I spent more than that at Home Depot for four of them, and then bought chain for a solution that somebody else posted here.

Helping the economy! I like it!

 

[Trigganometry]

The bolts of the Ranger are M6, I spent more than that at Home Depot for four of them, and then bought chain for a solution that somebody else posted here.

They’re not normal fasteners. They’re hardened ones so the don’t sheer off with load shift. Don’t cheap out on these!

Sponsored