The PIC whore club! Come on in!

[Arly]

I went up to mount Washington last year with the Ranger and at the summit they have a multi-screen POV of what it's like operating a trail maintenance plow navigating through various weather conditions. Some great pictures! Any special licensing or certifications to operate such machinery?

Well not explicitly but a PHD from TSC* is very helpful.

*who all here knows this joke?

Sponsored

 

[underwhelmed]

Looked out the back window a few moments ago…I’m going to need a larger bird bath!

 

[KNI]

New tree felling accessory

wire for 11.5m/380kg (12.5 yards / 840lbs)

 

[David Schuster]

Trailered the car on a 1125-mile trip for a car show. Truck ran great, no issues at all.

 

[Arly]

Got the trails mowed today with a loaned to us tractor. Took about 5 hours with this 72" cut machine. Grass, shoots and weeds not all that thick this year due to lack of rain. Did see some 4ft tall ferns along the way.

 

[myothercarizahearse]

Took about 5 hours

that's alotta beer

 

[Synfulz]

Installed a pulley type storage for our bikes.

 

[KNI]

Testing the winch. Seems to be excellent for felling the leaners and pulling works also.

P.S. The hay bales are left over from previous owner

 

[RedDakooter05]

aka bike rider beheader

 

[9zero1790]

on a back road.

ok photo gurus, how do i take a sunset picture without the light flair (idk if thats the term) messing it up??

 

[Synfulz]

on a back road.

ok photo gurus, how do i take a sunset picture without the light flair (idk if thats the term) messing it up??

Go into pro mode and you have much better control of settings.

 

[Rhino]

not a body guy/paint person but id say this is coming out pretty good on this refinish of this carbon fiber hood for my civic. this hood looked pretty bad when i got it! it was hazy and couldnt really tell it was carbon plus it had a load of overspray on it from someone before i got it! still gotta hit some spots that had runs with high grit then a bit more clear then polish and it should be good to go!

 

[Rhino]

that's alotta beer

that was my thought as well!

 

[Arly]

Over the weekend I used a back-blade attached to a kubota and here is some pics. This is a parking lot at the trails we care for and water was being retained here. Doing this and making it level was easier that I thought it would be*. The hydraulic angle adjustments was very, very nice to have. I also pulled out some old stumps and rocks with it.
*I grew up in the AG industry.

 

[OrangeStreak]

Bought a 2023 Marlin hardtail today. Light blue to midnight blue color. Shifter: Shimano Deore M4100, 11-46, 10 speed. Wheels: 29X2.40" Unfortunately, the old Dawes Mtn. Bike got stolen

Can't wait for this baby to get built and take her out for a run! Will post pics then.

Sponsored