Rear lower

[PapaBill]

What is the best way to lower the back end of a 2019 ranger?
1. De-arch the springs?
2. Spring lowering kit?
3. acetylene torch?;-)

Sponsored

 

[PltFX4]

Search the forum... been much talk about this topic in the past.

And there is no short answer... depends on what your going for and your budget.
The Ranger leaf spring situation does not make it "easy" to do and still be reliable (so the spring doeos not snap)... The one I looked at but never exicuted on is this one:
FLIP KIT | 5 OR 6 INCH ADJUSTABLE DROP - 6531

 

[ScarzRanger21(2.0)]

Just raise the front… Bigger tires, offset wheels, maybe an offroad bumper. Problem solved!

 

[ScarzRanger21(2.0)]

In all seriousness. I wouldn’t suggest doing anything to compromise the factory leaf springs. Easiest way is to get an axle flip kit.

 

[PapaBill]

Search the forum... been much talk about this topic in the past.

And there is no short answer... depends on what your going for and your budget.
The Ranger leaf spring situation does not make it "easy" to do and still be reliable (so the spring doeos not snap)... The one I looked at but never exicuted on is this one:
FLIP KIT | 5 OR 6 INCH ADJUSTABLE DROP - 6531

Thanks Eric!
S/F BIll

 

[Grandaccess]

What is the best way to lower the back end of a 2019 ranger?
1. De-arch the springs?
2. Spring lowering kit?
3. acetylene torch?;-)

acetylene torch, and video it because we all want to see it!

Sponsored