Looking for Splash Gaurds/Mud Flaps That Work With Factory Wheel Lip Moldings

[theprinceofsnj]

I got mine off eBay. I forget the brand. I do know I didn't pay a lot for them. And they fit nicely.

Sponsored

 

[COblue]

Those look like they are the ones that will fit! Post a pic, if you can.

I also have a weathertech set that I've only used on the rear that I should probably put up on marketplace here.

I liked how minimal the AliExpress ones were, mainly used the rear weathertech for longer trips towing the boat. Note that the cheapo ones aren't stopping much mud spray, but are less likely to get ripped off while off-road. The rear weathertech stuck down low, but provided good coverage.

I've got 235/55/18 snow tires on and it still doesn't block much spray, the thinking is it'd block and pebbles kicked up and to keep the upper door clean/undamaged.

I've yet to decide which I'll keep when I put my EGR fender flares on, they still need another clear coat layer.

 

[COblue]

I put these on from Amazon.
Tecoom Mud Flaps Splash Guards... https://www.amazon.com/dp/B0811RXKX6?ref=ppx_pop_mob_ap_share

Looks like the AliExpress ones at twice the price.

 

[ShapeShifter]

Rok Blox and Weather Tech.

Rok Blokz looks like the answer for me. They not only specifically mention fitment for the Tremor, but their install video is actually on a Tremor!

Thanks for the heads up!

 

[COblue]

$150 for mud flaps is insane, I paid less for rear shocks ?

 

[ShapeShifter]

$150 for mud flaps is insane, I paid less for rear shocks ?

Cheaper than Ford parts.

 

[06Warrior]

Looks like the AliExpress ones at twice the price.

I paid $55.00 for them. Wasn’t hard to install. They look great and are working fine so far. Pretty happy with them.

 

[theprinceofsnj]

I paid $55.00 for them. Wasn’t hard to install. They look great and are working fine so far. Pretty happy with them.

I think they might be the ones I bought also.

 

[Count Desmondo]

I also have a weathertech set that I've only used on the rear that I should probably put up on marketplace here.

I liked how minimal the AliExpress ones were, mainly used the rear weathertech for longer trips towing the boat. Note that the cheapo ones aren't stopping much mud spray, but are less likely to get ripped off while off-road. The rear weathertech stuck down low, but provided good coverage.

I've got 235/55/18 snow tires on and it still doesn't block much spray, the thinking is it'd block and pebbles kicked up and to keep the upper door clean/undamaged.

I've yet to decide which I'll keep when I put my EGR fender flares on, they still need another clear coat layer.

I'm very interested to see these EGR fenders. Did you order them from an American distributor?

 

[COblue]

I'm very interested to see these EGR fenders. Did you order them from an American distributor?

I ordered off EGRs website. The rugged flares are 50% off right now!

Spray can paint job cost $50. I'm no expert at painting, but it looks fine if you're not nitpicking. Photos are with 2" spacers on stock wheels 265/70/17

 

[Count Desmondo]

I ordered off EGRs website. The rugged flares are 50% off right now!

Spray can paint job cost $50. I'm no expert at painting, but it looks fine if you're not nitpicking. Photos are with 2" spacers on stock wheels 265/70/17

Awesome build there. Those looks great! Sucks that they don't have a supercab option.

 

[COblue]

Thanks! Got the inspiration to paint them after seeing others results here.

Rough Country has some for a similar price if you're looking for a super cab option. I really didn't wanna spend $500 on flares.

 

[Hocakes]

Beware when you go to install them. There are some omissions in the video & in the pdf directions that make it difficult. Ask me how I know. Also had a malformed hole in one of the rear brackets that allows the nut to fall out if you even look at it.

Rok Blokz looks like the answer for me. They not only specifically mention fitment for the Tremor, but their install video is actually on a Tremor!

Thanks for the heads up!

 

[ScarzRanger21]

I found a set of 4 on Amazon for ~$70 but they don't fit over the factory moldings. The ones on Ford's website that supposedly fit my VIN are $100 just for the front ones

Anybody know where to get some aftermarket mud flaps that fit with the factory wheel well molding?

Any help is appreciated!

What moldings are you talking about? I bought some on amazon a couple years ago for like $50. They fit no problem. Took them off when I upsized tires and got rid of them though.

 

[ShapeShifter]

What moldings are you talking about? I bought some on amazon a couple years ago for like $50. They fit no problem. Took them off when I upsized tires and got rid of them though.

The Tremor moldings are different. Needed flaps specifically for the Tremor. I went with Rock Blox. They're awesome.

Sponsored