How much free space needed - front suspension

[UtahShooting]

Got new tires (275/65 R18) installed on FX4 Lariat at same time I had Bilstein 5100's installed to lift front level. Stock rims.

They fit and look great with no rubbing so far during street driving.

I did notice that when I stuck my hand behind tire there is only 1/2" or so of space between front spindle and inside of tire. I'm thinking this shouldn't be an issue but want to check with folks more knowledgeable before I take it offroading.

Sponsored

 

[machinist85]

A 1/2" is more than enough. As the suspension flexes the distance between the tire and spindle stays the same.

 

[UtahShooting]

That's what I thought but wanted to make sure. Thanks!!

 

[Dereku]

Be careful if you air down. It should be the bottom that flexes the most but I just want to mention it.

 

[Frenchy]

Be careful if you air down. It should be the bottom that flexes the most but I just want to mention it.

Even woth an air down it will be fine. Never had the issue on my ranger and im pretty sure I had 285/70-17 woth no spacers on factory wheels.

 

[wdeydwondrer]

I just happened to check behind mine today after I put the new grabbers on last week and I can't put a finger between the tire and spindle, probably 1/2'' clearance. No rub marks or anything though so good enough I guess.

Sponsored