Wiring Accessory Lighting and the placing of Light Switch Panels

[SheepDogRain-Jar]

I could use some assistance in wiring hood-mounted lighting and a light bar on a nudge (aka Bull) bar. Also I am purchasing a three switch light panel and is interested where Owners placed their switch panels? I was thinking directly in front of the shifter, in that small 2" X 4" slope down into the open tray area (see attached pic); or on the console directly under the cover and protected one side by the extension of the lid. Please be a specific as possible, for I know how to fix (and sometimes cause....) damage done by high velocity projectiles, but this mechanical stuff not so much. Thanks in advance.

Sponsored

 

[cfhgarza]

I really like my Lightforce facia. Looks like it supposed to be there and the TBC knob can go in the center.

 

[OFC Ranger]

Though Im about to move it to the top dash center tray.

 

[SheepDogRain-Jar]

Though Im about to move it to the top dash center tray.

Jack, Thanks for the suggestion. I am sure I would hit my knee on your set-up every time I got in the truck. I hit the roof-mounted sunglass holder with my head, EVERY TIME I got in the cab. I have adapted to sit and spin around; helps my sciatica too....and my wife remembers to close it when I'm done!

 

[SheepDogRain-Jar]

I really like my Lightforce facia. Looks like it supposed to be there and the TBC knob can go in the center.

Thanks for the suggestions. Interesting I do not have that facia between the 12V outlets. Actually there is nothing there but I can feel a "vented" facia, which may be removable up and behind the outlets. I which I had that setup, that is a perfect place to mount them with your clean look. Interesting Ford changes console makeups, maybe Phil S. has some knowledge on that.....!

EDIT: Duh! I just went to the LightForce web sight. I see now you buy that facia and mount your switches to it. $95.00 Yikes. That is going to cost me a lot of vacuuming, dinner preparations along with cleanups, plus cups of coffee in bed too!

 

[Big Blue]

Thanks for the suggestions. Interesting I do not have that facia between the 12V outlets. Actually there is nothing there but I can feel a "vented" facia, which may be removable up and behind the outlets. I which I had that setup, that is a perfect place to mount them with your clean look. Interesting Ford changes console makeups, maybe Phil S. has some knowledge on that.....!

Not a Ford change. Lightforce is an after market facia to replace OEM facia.

 

[KnightRanger]

I have a six gang Aux switch panel.
Safe way to add accessories now or in the future.
Its Relay and Fuse protected.

 

[cfhgarza]

Thanks for the suggestions. Interesting I do not have that facia between the 12V outlets. Actually there is nothing there but I can feel a "vented" facia, which may be removable up and behind the outlets. I which I had that setup, that is a perfect place to mount them with your clean look. Interesting Ford changes console makeups, maybe Phil S. has some knowledge on that.....!

EDIT: Duh! I just went to the LightForce web sight. I see now you buy that facia and mount your switches to it. $95.00 Yikes. That is going to cost me a lot of vacuuming, dinner preparations along with cleanups, plus cups of coffee in bed too!

Yeah it's a little bit pricey. It does come with the Kangaroo switch. There are other options out there but I did think any looked as nice.

 

[SheepDogRain-Jar]

I have a six gang Aux switch panel.
Safe way to add accessories now or in the future.
Its Relay and Fuse protected.

John;
Thank you for the pics, I'm a visual learner. I also see you like Brother P-Touch label makers. It drives my wife crazy with EVERYTHING labeled till she finds something to help her, but I never hear of that! Also, I noticed a FOP badge....where are you mounting that? There is room on either side of a rear state plate, I presume. I'm afraid my bull bar covers up too much of my Raptor grill already.

 

[cfhgarza]

I just remembered this. The 2021 Tremor package will have a switch bank above the radio display. Not sure when it will become available but I'm sure Ford will sell it as an accessory.

 

[WyoRanger]

That would be perfect for my needs. just have to wait till they start making them so that the dealer will be able them. Would anyone know a part Number for that panel.

Kymm

 

[KnightRanger]

John;
Thank you for the pics, I'm a visual learner. I also see you like Brother P-Touch label makers. It drives my wife crazy with EVERYTHING labeled till she finds something to help her, but I never hear of that! Also, I noticed a FOP badge....where are you mounting that? There is room on either side of a rear state plate, I presume. I'm afraid my bull bar covers up too much of my Raptor grill already.

I like to label them...for the next guy
( I tend to upgrade/ trade evey few years or less).

The FOP, I just carry it in memory of my old partner as he gave it to me years ago before he passed.

Anyway, here’s some pics that might be useful.
If you need anymore pics or info, Let me know.
(The only hard part was snaking the wire harness through the firewall grommet).

 

[SheepDogRain-Jar]

I like to label them...for the next guy
( I tend to upgrade/ trade evey few years or less).

The FOP, I just carry it in memory of my old partner as he gave it to me years ago before he passed.

Anyway, here’s some pics that might be useful.
If you need anymore pics or info, Let me know.
(The only hard part was snaking the wire harness through the firewall grommet).
John; Thanks for the additional pics. I ordered and they have come in wiring harnesses from AMZN. I think I am okay with them, after all they are plug and play. My (last?) question is where in the firewall did you go through? This weekend I will have time to start pulling dash parts off and hopefully won't break tabs like my VW Scirocco and installing stealth-speeding devices, back in the day.

 

[KnightRanger]

Look under the Driver’s side, under dash/steering column.
There you will find the Oem thru-Firewall grommet.
(see first pic on my previous post)

Btw, This wire tool is useful.
Just take it slow and make sure you dont hit anything on the other side.
https://www.amazon.com/gp/product/B073WZCL8Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

(has been used by and recommended by a few members here, including me)

 

[jblc]

Agreed, that would be a great accessory. I did a quick search, but didn't see it available yet. (Which makes sense, since the Tremor is delayed)

Sponsored