Dash cam question

[Omar0601]

Hi guys for those of you that have hardwired your dash cam, which fuse did you use that’s always powered? I’ve searched but 35 and 36 don’t stay on. Thanks for the help

Sponsored

 

[cfhgarza]

Check this adapter out. It plugs into the ODB port and shuts off before the battery is drained. It's what I use. https://smile.amazon.com/Hardwire-Parking-Protection-Installation-Compatible/dp/B07Q3V6C1C

 

[Omar0601]

Check this adapter out. It plugs into the ODB port and shuts off before the battery is drained. It's what I use. https://smile.amazon.com/Hardwire-Parking-Protection-Installation-Compatible/dp/B07Q3V6C1C

I already have a shock sensor attached to my OBD2 So I don’t know if that will work

 

[commbubba19]

I have a thread on this

 

[Omar0601]

I have a thread on this

thanks for the input guys. I found that slot 29 is constant. I was told by someone else 37 would work but my cam only turned on with the truck. 29 provides constant power to the cam now

 

[commbubba19]

thanks for the input guys. I found that slot 29 is constant. I was told by someone else 37 would work but my cam only turned on with the truck. 29 provides constant power to the cam now

sorry, didn't post the link

https://www.ranger5g.com/forum/threads/my-dash-cam-installation.8840/

35 was the fuse i used.

 

[Omar0601]

Did

sorry, didn't post the link

https://www.ranger5g.com/forum/threads/my-dash-cam-installation.8840/

35 was the fuse i used.

did 35 give you constant power? I tried and my camera didn’t turn on unless the truck did

 

[commbubba19]

Did


did 35 give you constant power? I tried and my camera didn’t turn on unless the truck did

sorry no this is switched.

Sponsored