Concerning a B&M 22200 Trans Dip Stick

[LB'sTremor]

curious do you need to extend the filter or pickup tube with the deep pan?

LB

Sponsored

 

[ctechbob]

curious do you need to extend the filter or pickup tube with the deep pan?

LB

No, the filter sits at the same level and bolts up as it normally does.

 

[TJC]

Where did you get that deeper trans pan? Maybe a link?

TIA

I ordered mine through XDP

But there are many sources

 

[txquailguy]

Mark. Off topic but what OBD guage are you using and what PID are you using to display oil pressure?. I've been using Torgue Pro and can’t find a PID for oil pressure. I know Forscan can read oil pressure, so I know it's available. Just need the PID specifics to make it work.
Thanks

Lee I will get back to you on the PID. I was using the old Torque Pro app that I bought and downloaded a couple of years ago but my Fire tablet bit the dust. When I bought a new one and went to download the app it wasn't in the same form. I believe I'm using an updated version and it allowed me to purchase a whole set of 2019 Ford PID's for $15. The original program was still $5. I did pick up the added PID's and that is how I have been pulling Oil Pressure since using the new app. I could never find one when using the old app. I'm telling you all that because I'm not sure if I can get to the PID addressing with the new app......I'm still blown away that Ford did not provide an Oil Temp sensor for our Rangers.....very ridiculous since these ARE considered High Performance engines according to my service tech at the dealer.
Anyway, I'll see if I can get that for you man....it's nice to have....

 

[Big Blue]

Lee I will get back to you on the PID. I was using the old Torque Pro app that I bought and downloaded a couple of years ago but my Fire tablet bit the dust. When I bought a new one and went to download the app it wasn't in the same form. I believe I'm using an updated version and it allowed me to purchase a whole set of 2019 Ford PID's for $15. The original program was still $5. I did pick up the added PID's and that is how I have been pulling Oil Pressure since using the new app. I could never find one when using the old app. I'm telling you all that because I'm not sure if I can get to the PID addressing with the new app......I'm still blown away that Ford did not provide an Oil Temp sensor for our Rangers.....very ridiculous since these ARE considered High Performance engines according to my service tech at the dealer.
Anyway, I'll see if I can get that for you man....it's nice to have....

Thanks

Sponsored