beep over 70 mph

[dozxab]

Since my latest Sync3 update, I get a beep over 70 mph coming from the dash area (?). 3 beeps about 15 seconds apart. It is really annoying as here in AZ all the interstates are posted 75 mph. Does anyone know how to turn it off or raise the trigger speed? Spent a lot lot of time searching here and google. Ya, I know, turn up the radio!

Sponsored

 

[RangerBill]

Since my latest Sync3 update, I get a beep over 70 mph coming from the dash area (?). 3 beeps about 15 seconds apart. It is really annoying as here in AZ all the interstates are posted 75 mph. Does anyone know how to turn it off or raise the trigger speed? Ya, I know, turn up the radio!

Do you have Mykey programmed?

From the owner's manual:

Various vehicle speed reminders so
MyKey drivers know when their vehicle
speed approaches the limits. Warnings
appear in your information display and
a tone sounds when the MyKey drivers
exceed the set vehicle speed.

 

[Grumpaw]

Only do "69".....

 

[dozxab]

Do you have Mykey programmed?

From the owner's manual:

Various vehicle speed reminders so
MyKey drivers know when their vehicle
speed approaches the limits. Warnings
appear in your information display and
a tone sounds when the MyKey drivers
exceed the set vehicle speed.

Sorry, I should have mentioned I spent about an hour on google and here before asking. I checked MyKey and neither are programed and I went through every setting that seemed likely.

 

[dapakattack]

Maybe disconnect your battery for a few minutes?

 

[DukeCanBuildit]

Only do "69".....

 

[TJC]

Only do "69".....

What?!? Drop down from 79 !?!?!

 

[airline tech]

I think somehow - A My-Key got programed, I suggest getting both FOBs in the truck and pull out the owner's manual and viewing the My-Key section. On clearing the My-Key limitations.
It must have the FOB - registered as Admin to do this and I think it has to be in the Back-Up slot for (PB-Start) or in the (Switch-Keyed Start)

 

[dozxab]

I think somehow - A My-Key got programed, I suggest getting both FOBs in the truck and pull out the owner's manual and viewing the My-Key section. On clearing the My-Key limitations.
It must have the FOB - registered as Admin to do this and I think it has to be in the Back-Up slot for (PB-Start) or in the (Switch-Keyed Start)

I checked both of them, they are both Master, not programmed. Also, I am not getting any other messages or warnings. I have had it since new and purchased 5/23. It just started when I got the 3.4 software upgrade.

 

[RangerBill]

I checked both of them, they are both Master, not programmed. Also, I am not getting any other messages or warnings. I have had it since new and purchased 5/23. It just started when I got the 3.4 software upgrade.

Try a Sync hardware reset in the menus. If that doesn't work, then try reinstalling the Sync upgrade.

 

[airline tech]

If a Sync reset does no do it - then as suggested a My-Key wipe attempt as somehow it is partially activated, possibly create one then remove it. To trigger access then reset.
similar to enable then disable a feature to get a reset if operation.

 

[WOADKIL]

Only do "69".....

I could live with " only do 69....."

 

[AzScorpion]

I found the culprit.

 

[Grandaccess]

Only do "69".....

Thats what she said LOL

Sponsored