Bedliner sprayed over rubber plugs.

[remtv]

As the title says, I just had my bed line-X and it didn't really cross my mind to tell them to take out any of the plugs, either the side oval shaped ones (4x) or the 2 big ones at the end of the bed at the bulkhead. The guy actually told me we he was going to spray over them I did not even really think about objecting. They did remove all my mounting points although they did spray over all the unfilled threaded holes in the bed still. Probably should have thought about it more, oh well.

Should I be worried about the plugs? as it doesn't seem like anyone has any idea what they are actually for as well as it seems that the bed walls are too weak for any kind of load bearing application anyway.

Thanks

Sponsored

 

[Radioman]

As the title says, I just had my bed line-X and it didn't really cross my mind to tell them to take out any of the plugs, either the side oval shaped ones (4x) or the 2 big ones at the end of the bed at the bulkhead. The guy actually told me we he was going to spray over them I did not even really think about objecting. They did remove all my mounting points although they did spray over all the unfilled threaded holes still in the bed still. Probably should have thought about it more, oh well.

Should I be worried about the plugs? as it doesn't seem like anyone has any idea what they are actually for as well as it seems that the bed walls are too weak for any kind of load bearing application anyway.

Thanks

I personally won't worry about them. Nice decal though.

 

[remtv]

I personally won't worry about them. Nice decal though.

Yeah, that's what I thought as well as I can't think of anything they would be useful for besides risking cracking the bedwalls with some kind of anchor. Really the only holes I will be using are the rear threaded holes for some kind of brackets for a bed cover as well as the square hole for an 12v plug.

Thanks

 

[2020FX4]

They did the same on my truck..... The linex peeled off the rubber/plastic without an issue....

 

[RedDakooter05]

Personally I would use those openings to apply krown/fluid film.

But no need to worry about em.

 

[Peragrin]

The factory spray liner sprays right over them too. Not to worried.

 

[ppfd]

Line x sprayed everything in my bed.

Installer told me to use a razor knife and trim around them if I needed to get them out

 

[Sandeezy]

you ever figure out what those rubber plugs are for on the side? also those what size are those eyebolts on the side of your bed? I need a few more tie down spots. Thank!

 

[remtv]

you ever figure out what those rubber plugs are for on the side? also those what size are those eyebolts on the side of your bed? I need a few more tie down spots. Thank!

No idea what the plugs are for, but the bolts are m8
https://www.amazon.com/gp/product/B01NBN7L55/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

 

[Budule]

I thought the oval holes were for bedlights... But my factory liner is not speayed over them ...

 

[Peragrin]

M8 bolts for the bed. the ones along the tailgate are M6. (where the swing case and bed extender bolt in.)

 

[Grumpaw]

The plugs obviously plug the holes. If the holes were not plugged, all the air in the bed would leak out.....

 

[Stevedbvik1]

The plugs obviously plug the holes. If the holes were not plugged, all the air in the bed would leak out.....

And your relatives riding in the bed would suffocate

 

[Budule]

I replaced my bed air with helium , better mpg and everybody talks funny...

 

[remtv]

I replaced my bed air with helium , better mpg and everybody talks funny...

I went with the dealer add on nitrogen filled bed

Sponsored