303 GRAPHENE NANO SPRAY COATING

[JSauce]

Wow! Looks really good, Dave! Think I’m going to have to follow your lead. Lived in AZ all my life but summer never gets easier. I’m not ready yet! ?haha.

Sponsored

 

[THLONE]

How about a AZ pin stripe test?

 

[AzScorpion]

Wow! Looks really good, Dave! Think I’m going to have to follow your lead. Lived in AZ all my life but summer never gets easier. I’m not ready yet! ?haha.

Thanks Jeromy! The Graphene is really easy to apply and I would recommend doing 2 coats they way the sun is out here. I did one after dinner then the next coat in the morning but you can do them back to back as there's no curing time. I'm not ready for the heat just yet and hoping it's not like last summer! ?

How about a AZ pin stripe test?

Sure, you start first. ?

 

[THLONE]

I can only a test to mud sticking, mesquite, greasewood, palo verde, and cholla pin striping the factory paint.

 

[AzScorpion]

Truck looks great! If you want a crystal clear windshield take a look at the video in this write up I did. After years of struggling with streaks I finally found a way to have perfectly clear glass.

https://www.ranger5g.com/forum/threads/how-to-super-clean-the-inside-of-your-windshield.4934/

 

[AzScorpion]

I hate them! Every time you think you have them looking good another streak pops up. lol Just be careful and don't put a lot pressure using the Magic Eraser, just a little pressure and it takes all the oils off the windshield.

 

[Scottopia]

I put a good coat+ of the 303 Graphene on 2 weeks ago. Went on and off real easy and immediately noticed it pull the HPR out nicely. Was using the TW Hybrid Ceramic, and prefer this to it so far.

Curious to hear what those using the Graphene are or will use between coats. Was thinking of continuing to maintain with the TW Hybrid Ceramic 3 in 1 Detailer. Have not tried the Optimum yet.

 

[AzScorpion]

I put a good coat+ of the 303 Graphene on 2 weeks ago. Went on and off real easy and immediately noticed it pull the HPR out nicely. Was using the TW Hybrid Ceramic, and prefer this to it so far.

Curious to hear what those using the Graphene are or will use between coats. Was thinking of continuing to maintain with the TW Hybrid Ceramic 3 in 1 Detailer. Have nor tried the Optimum yet.

I really like the Optimum gloss enhancer/speed detailer. It seems to last a few weeks here and even then the Graphene still shines good. You can also just spray it on right before drying and apply it that way but I haven't tried that yet.

 

[FoD]

 

[Scottopia]

Great price today on the Graphene on the Detailed Image site…

Shipping is high under a $49 order which sucks, but over $49 code DI499 will get $4.99 shipping.

 

[AzScorpion]

Great price today on the Graphene on the Detailed Image site…

Shipping is high under a $49 order which sucks, but over $49 code DI499 will get $4.99 shipping.

Scott, How's yours holding up? So far after 6 months mines been great. I'll add some speed detailer/gloss enhancer between washes and it really makes it pop.

I got that email too. I've bought a few things from Detailed Image when they have their free shipping codes otherwise they're kind of pricey. You can usually get a better price from Amazon and even Gold Eagle (who makes the Graphene) has good discounts if you subscribe to their emails and has free shipping all the time over $50.00.

 

[Scottopia]

Scott, How's yours holding up? So far after 6 months mines been great. I'll add some speed detailer/gloss enhancer between washes and it really makes it pop.

I got that email too. I've bought a few things from Detailed Image when they have their free shipping codes otherwise they're kind of pricey. You can usually get a better price from Amazon and even Gold Eagle (who makes the Graphene) has good discounts if you subscribe to their emails and has free shipping all the time over $50.00.

It is holding up surprisingly well, still beading up and cleaning pretty easily with bugs and evil bird bombs wiping right off, even greasy ahole dealer service tech prints ?. Have not had to do as much up keep as I did with the T Wax Hybrid. I am a fan so far.

I keep an eye on the 303 on a few sites and have found Amazon very misleading as some of their sIzes are usually less around 15oz or so vs 32oz on the DI or 303 sites. But then other items are the same size and cheaper (Satin Tire spray & the UV Protectant). They are sneaky.

Which enhancer are you using?

 

[AzScorpion]

It is holding up surprisingly well, still beading up and cleaning pretty easily with bugs and evil bird bombs wiping right off, even greasy ahole dealer service tech prints ?. Have not had to do as much up keep as I did with the T Wax Hybrid. I am a fan so far.

I keep an eye on the 303 on a few sites and have found Amazon very misleading as some of their sIzes are usually less around 15oz or so vs 32oz on the DI or 303 sites. But then other items are the same size and cheaper (Satin Tire spray & the UV Protectant). They are sneaky.

Which enhancer are you using?

I'm using the Optimum one here and it's really easy to apply and last about 2 weeks. I bought the 32 oz one as it's a better deal and you mix it 4-1, I use distilled water. I also bought this spray bottle which puts it on very lightly with a fine mist.

I just washed mine at the self serve carwash yesterday after doing a little off roading here in Sedona. It cleaned up really easy and still beads up great. If I can get a year out of it here with the brutal sun and UV rays I'll be happy.

 

[AzScorpion]

A couple good videos explaining what Graphene is and how it works.

 

[JaysOnTheEDGE]

what's the best way to apply it with a foam pad or micro fiber pad or does it matter?

Sponsored