oggvorbis
Well-Known Member
- First Name
- Pablo
- Joined
- Feb 2, 2019
- Threads
- 10
- Messages
- 126
- Reaction score
- 174
- Location
- Victorville, CA
- Vehicle(s)
- 2019 Ford Ranger Lariat FX4
- Vehicle Showcase
- 1
- Thread starter
- #1
Saw the old fascia switch post and noted that the rep from Lightforce said that the only modification would only be needed if the NA Rangers had a dual usb port where the left 12v socket is. Since they ended up just having two 12v like the global Rangers, I decided to take a chance and order the fascia from Australia. I ordered from https://www.ozautoelectrics.com/ and paid $118 AUD and $35AUD for shipping and took 5 business days to arrive here in California.
I found that installation was exactly like the Lightforce install video for our Rangers. So I'm not going to go into detail with it.
A tip I could give for those planning on doing this in the future, swap out the gray Lightforce retainers that come with the fascia with the white OEM ones from your original fascia. The lightforce ones didn't seat properly and had some trouble setting it in securely. I took it out, reinstalled the OEM retainers and they snapped right in
Very pleased with the product, my wife thought that the switch panel came with the car when I showed her the remoted control unit for the brake controller. All edges sit flush agains the side panels and the brake control unit is in the perfect position for where I wanted it to be. 12V flip cups work and function properly like before.
I found that installation was exactly like the Lightforce install video for our Rangers. So I'm not going to go into detail with it.
A tip I could give for those planning on doing this in the future, swap out the gray Lightforce retainers that come with the fascia with the white OEM ones from your original fascia. The lightforce ones didn't seat properly and had some trouble setting it in securely. I took it out, reinstalled the OEM retainers and they snapped right in
Very pleased with the product, my wife thought that the switch panel came with the car when I showed her the remoted control unit for the brake controller. All edges sit flush agains the side panels and the brake control unit is in the perfect position for where I wanted it to be. 12V flip cups work and function properly like before.
Sponsored
Last edited: