MXGOLF
Well-Known Member
My mechanic said the same about the Cooper AT3's also. When I wear out the stock tires that is what I am getting.
Sponsored
That looks expensive. And we like expensive around here?Finally got a decent bike rack that lets me open the tailgate.
![]()
![]()
![]()
![]()
![]()
I'd be interested to hear how they hold up. I installed some no-name LEDs in my license plate lights and they would fail/flicker after a bit of time, maybe a month or two. Installed Philips 194 LEDs and they've been going for 6 months now.cheap upgrade but makes a difference in appearance in my opinion. I think it was like 22 bucks shipped with Amazon prime
![]()
![]()
![]()
![]()
Not the highest end rack on the market, but pretty close ?. I used a extension on my last rack and thought I was going to twist apart on my last adventure. So it had to be doneThat looks expensive. And we like expensive around here?
Pretty cool, though!
that's what I was reading on most no name ones. the auxito and lasfit were the highest rated( although that doesn't mean much because of bots) I have had relatively good experiences with auxito in the past. I also didn't go with their cheapest sets either.I'd be interested to hear how they hold up. I installed some no-name LEDs in my license plate lights and they would fail/flicker after a bit of time, maybe a month or two. Installed Philips 194 LEDs and they've been going for 6 months now.


Finally got a decent bike rack that lets me open the tailgate.
![]()
![]()
![]()
![]()
![]()
Finally got a decent bike rack that lets me open the tailgate.
![]()
![]()
![]()
![]()
![]()
I like the new stance! I will be curious what 285 wide look like with the wheel spacers.Threw some 1.5” wheel spacers on the Tremor?
Removed my intrusion bars in preparation for the 285’s… coming soon….
![]()
![]()
![]()
![]()
![]()
![]()
I actually just found some pictures for that combo to give you some motivation.These are just some I had on hand with the 1" front level, 1" wheel spacer and 285/70/17. No rubbing that I have at least come across.
![]()
![]()
![]()
![]()
what are these pod lights and where are they located?Ok I upgraded my rear view mirror. I did the LED Turn Signals and Pod Lights. Awesome.![]()
![]()
I had this same issue on like 4 sets. The drivers side would just die and the passenger side would flicker. The driver side always had crap in it and looked wet (which I don’t get since it has a seal) so I added dielectric grease and all seems well now.I'd be interested to hear how they hold up. I installed some no-name LEDs in my license plate lights and they would fail/flicker after a bit of time, maybe a month or two. Installed Philips 194 LEDs and they've been going for 6 months now.