What did you do to your Ranger today?

[XL GT]

Applied vinyl protectant to my tonneau cover.

Sponsored

 

[Hank the Tank]

Installed the ESI tailgate seal kit. Install was straight forward, though it does look a bit funky because of all the small individual pieces everywhere needed to fill in the gaps. I definitely needed some way of closing off the bed better, and I think this will do the trick.

 

[Opusnbill7]

Ordered this based on previous recommendations here and on Amazon:

KEYO1E 4.9'' Short Antenna Compatible with 13 to 2019 Escape
by KEYO1E
Learn more: https://www.amazon.com/dp/B0969F8P96/ref=cm_sw_em_r_mt_dp_BCNNVRQQSF7M4R5SW33E?_encoding=UTF8

Boy the reception is really bad on this truck compared to my previous GM vehicles (even with the stubby roof antennas). Hopefully this antenna is better. I don't expect it to be as good as an old "whip", but it should be at least as good as the GM stubby I would expect. Only thing I'm disappointed in so far.

 

[CarbonTremor]

Installed the original stubby and washed / detailed

 

[Mcssls]

Wash ceramic coat and tint brake lights. Undercoat front fender wells. Couldn’t stand seeing body color in there

 

[drano38]

Installed 3M clear paint protection on the right door sills. And also put Lamin-X smoke film on the side markers to tone them down a bit.
Sunday/Monday will be finishing the door sills, and Lamin-X on headlights, and their "clear bug deflector" -- a simple piece of clear bra the hood leading edge.

 

[Joyride]

Removed the FX4 decals…now I’m questioning that decision ?

 

[Tom_C]

Installed the ESI tailgate seal kit. Install was straight forward, though it does look a bit funky because of all the small individual pieces everywhere needed to fill in the gaps. I definitely needed some way of closing off the bed better, and I think this will do the trick.

I installed the same one, and I'm not convinced. I started this thread looking for a better solution. https://www.ranger5g.com/forum/threads/australian-members-do-you-have-ideas-for-gate-seals.13594/

 

[Bludrok]

Installed passenger side view camera for my Rostra, and a Rough Country Differential Skid Plate.

 

[Hank the Tank]

I installed the same one, and I'm not convinced. I started this thread looking for a better solution. https://www.ranger5g.com/forum/threads/australian-members-do-you-have-ideas-for-gate-seals.13594/

Yeah, it does feel like a second-thought solution. I wish there was something tailored specifically for this tailgate, but I needed something; so I settled. I would happily exchange this setup for something more factory looking if/when it becomes available. I'll keep an eye out on that thread. Thanks.

 

[Bludrok]

Yeah, it does feel like a second-thought solution. I wish there was something tailored specifically for this tailgate, but I needed something; so I settled. I would happily exchange this setup for something more factory looking if/when it becomes available. I'll keep an eye out on that thread. Thanks.

Depending on what you are trying to accomplish, you could do something as simple as to put a strip of velcro on the bed and tailgate and then cover with something like this.

 

[JACKSMYDOG]

Removed the FX4 decals…now I’m questioning that decision ?

We don't need no stinkin stickers

 

[BDoc]

Not today, but yesterday. Gave her a bath and installed the AVS window deflectors.

 

[JACKSMYDOG]

Not today, but yesterday. Gave her a bath and installed the AVS window deflectors.

I've heard of bug deflectors, but never window deflectors.

Doesn't matter, I need one too. How much and where do I get some?

 

[Grumpaw]

The tip is on....

Where did you source that tip...looks good.

Sponsored