Glocker
Well-Known Member
- First Name
- John
- Joined
- Feb 11, 2020
- Threads
- 94
- Messages
- 2,531
- Reaction score
- 7,733
- Location
- Boca Raton
- Vehicle(s)
- 2019 Ford Ranger XLT FX4, 2014 Mustang GT
- Vehicle Showcase
- 1
I've got the Eibach ProTruck kit installed with springs and struts up front. The struts have grooves and inserts that lock into the grooves for setting your lift height before installation. You can end up with a variety of lift heights depending on if you use your factory springs or the Eibach springs and the positions of the inserts in the grooves. No spacers needed! I've got the Eibach shocks out back with an Autospring add-a-leaf kit installed. It rides a little stiff over bumps but supports the load out back without issue. This truck seems to be preforming very nicely off-road on the past two trips with this setup installed.Did you upgrade your springs? 3.75? If I recall correctly, you have spacers installed right? Plus a leveling kit I imagine? I want the same bumper but I will probably upgrade my front springs with beefyer eibachs. I have the standard ones that came with the Fox 2.5 DSC setup. It will sag too much with these.
Sponsored