What did you do to your Ranger today?

[BladeRanger]

I had to take one clip out from the flare and take one clip out holding the felt so I could bend it back.
Then and loosened the two fender bolts on the bottom. The plastic piece had 4 bolts so not bad to remove. That gave me room to pull the bar out.

I put the plastic piece back on and the clips for the flare and felt.

Thanks for the input.

Sponsored

 

[Bsenecal]

Hopefully in next 30 days I can begin this project. The Ranger Cave. Base of it all is going to be a an 18' x 26' carport on 8' legs with the sides and rear closed. I am going to do a custom front with barn style sliding doors.

The garagezebo has served its purpose, but I've been needing a workshop and proper parking area for a while now.

There is no such thing as a garage that is to big.

Brian

 

[P. A. Schilke]

There is no such thing as a garage that is to big.

Brian

HI Brian,

I have 3600 sq ft under roof. 1800 living and 1800 garage.... Garage space is too small.....

 

[FoD]

Painted the tailpipe as seen from back end view, Rusoleum hi temp flat black to go with the black MBRP tip I got yesterday

 

[MikeyTX]

Forscan the double horn honk and the piped in engine noise. Added an American flag decal top center of windshield. Ordered the rear sway bar upgrade.

 

[Swingpure]

I moved a few 2x6’s, from a deck being ripped up, with the Ranger and made some easily removable garden fencing. The bed extender really helped,

 

[viperwolf]

I painted a few parts, I was tired of seeing unpainted surfaces and rusted areas. So I sanded, repainted and undercoated unpainted body parts. Also painted the calipers and skid plates. Got rid of the rusted areas around the drive shaft and other things that dont matter.

If you want to hear a Bi Turbo clattery Diesel run You can listen to the Audio file. Yeah, the sound quality is lacking I know.

 

[TBR17]

I painted a few parts, I was tired of seeing unpainted surfaces and rusted areas. So I sanded, repainted and undercoated unpainted body parts. Also painted the calipers and skid plates. Got rid of the rusted areas around the drive shaft and other things that dont matter.

If you want to hear a Bi Turbo clattery Diesel run You can listen to the Audio file. Yeah, the sound quality is lacking I know.

Looks great. I've seen you going through some water and muddy roads. That thing looks like it just came off the assembly line.

 

[Cabose-1]

Wired some bed lights off my wolf haus plug, with a red glowy switch, for when i have the bed cover on!

 

[Cabose-1]

Wired some bed lights off my wolf haus plug, with a red glowy switch for when i have my bed cover on

 

[Ranger Dave]

Installed the Bakflip MX4

obligatory picture LOL

 

[viperwolf]

Looks great. I've seen you going through some water and muddy roads. That thing looks like it just came off the assembly line.

Thank You
Yeah, I spend a few hours hand washing everything under it as much as the body.

 

[AzScorpion]

Thank You
Yeah, I spend a few hours hand washing everything under it as much as the body.

Alex, get one of these so next time it won't be so back breaking. ?


https://www.amazon.com/dp/B08542CFK...olid=18AQHC875EVXC&psc=1&ref_=lv_ov_lig_dp_it

 

[viperwolf]

Alex, get one of these so next time it won't be so back breaking. ?


https://www.amazon.com/dp/B08542CFK...olid=18AQHC875EVXC&psc=1&ref_=lv_ov_lig_dp_it

I have one, and it helps when rinsing things off. However, the mud will still leave a film over everything. The only way I know to get it off is by hand. It Sucks, but hey Im retired so why not. In our new house, Ill install a lift and that will help alot.

 

[FordRager420]

Wired some bed lights off my wolf haus plug, with a red glowy switch for when i have my bed cover on

Looks great! I just got my Wolf Haus plug installed and I'm hoping to set something up in a similar fashion. Can you provide me with the parts that you used for the install?

Thanks!

Sponsored