OPT7 Running Board Lights - need help finding turn signal, parking, and door open lights wiring

[WilliamP]

If anyone out there can help me out, I would greatly appreciate it. I am currently trying to install my running board lights that have 3 functions (sequential turn signal lighting, parking lights, and door open courtesy lights). I think I've read through enough posts to find that there is a white wire w/ green strip under the door sill plate that I can tap into for my courtesy/door open lights. I have yet to find or read anything on here and Google that tells me which wires are my right and left turn signal wires nor the wiring for parking lights. Please if anyone has any info on this i would be grateful!

Sponsored

 

[mattyblazer]

Parking Lights Parking Lights - Turn Signal (Left) Turn Signal (Right) Dome Light

Green/Orange or Brown/Yellow (L); Brown/Yellow (R) Gray Blue/Green (LF); Gray/Orange (LR) Yellow/Violet (RF); Green/Orange (RR) Gray/Violet

BCM-Dash Fuse Box, black 40 pin plug (C), pin 30 (L); pin 37 (R) Headlight Switch, black 16 pin plug, pin 11 + BCM-Dash Fuse Box, black 40 pin plug (C), pin 39 (LF); blue 52 pin plug (D), pin 26 (LR) + BCM-Dash Fuse Box, black 40 pin plug (C), pin 38 (RF); blue 52 pin plug (D), pin 52 (RR) + Driver Kick, 40 pin plug (C275), pin 28