Need Tremor Fender Flare Replacement

[RangerT]

I have a 2021 Ranger Tremor and I recently got into a Fender Bender and my front passenger side fender flare was busted. I have been looking around and it appears the part has been discontinued. The shop my insurance sent me to put the standard ranger wheel lip molding on there without realizing it was the wrong part. Every time I look at my truck it drives me crazy. If anybody knows anyone or happens to have a set I will buy it off you. Any help would be greatly appreciated.

Edit: I added photos of the flared factory FP fender flare and the flush piece the shop installed.

Sponsored

 

[veedubtuner]

I would hit up Benny @LevittownFordParts.com just to make sure it's discontinued or just on Back order. I have a hard time believing a 2021 Tremor has discontinued parts already.



But then again, this is Ford we're talking about

 

[RangerT]

I just got off the phone with Ford Performance a few minutes ago and they confirmed it has been discontinued. I was initially skeptical as well. Doesn't make sense to me. But Like you said, it's Ford.

 

[veedubtuner]

Is this the part number HB3Z-9929164-A?



https://www.ebay.com/itm/166719393041

 

[RangerT]

Is this the part number HB3Z-9929164-A?



https://www.ebay.com/itm/166719393041

The Part # is M-19008-RT. That looks like the standard wheel lip molding in the link.

 

[veedubtuner]

Not gonna lie, not too familiar with Ford parts system, and the Tremor. I assumed a 2021 Tremor VIN would bring up the correct part number for the P/S molding. I thought the Ford Performance stuff was considered "accessory" parts us "normal" Ranger folks could get to add to our trucks lol.

 

[NerkyMohawk]

Time for some aftermarket flares to cover them up.

 

[PltFX4]

So the regular "flairs" are flush mounted and the Tremor editions are proud of the fender by 1" to 1.5"?? Is that correct?? (What Google Images suggests.)

 

[RangerT]

So the regular "flairs" are flush mounted and the Tremor editions are proud of the fender by 1" to 1.5"?? Is that correct?? (What Google Images suggests.)

Yes, they stick out about an inch.

 

[RangerT]

Not gonna lie, not too familiar with Ford parts system, and the Tremor. I assumed a 2021 Tremor VIN would bring up the correct part number for the P/S molding. I thought the Ford Performance stuff was considered "accessory" parts us "normal" Ranger folks could get to add to our trucks lol.

The Vin search didn't work for the shop that did the work either. That's why they put the standard lariat molding on because that's what the dealer sent them. I think it has something to do with the fact the Tremor was an additional package and not its own trim like on the f150. Ford needs to get it together.

 

[RangerT]

Time for some aftermarket flares to cover them up.

Ya that's what I will have to do if I can't find it. Just don't think insurance is gonna cover it though.

 

[DukeCanBuildit]

Some members have bought theirs from Summit Racing or Stage 3. You might be able to find them if you look beyond the obvious source, Ford.

Check out this thread from a couple of years back - you never know.

https://www.ranger5g.com/forum/thre...on-my-2019-lariat-fx4-sport-super-crew.23037/

Like Morgan, I just can’t believe these are already discontinued - makes no sense.

 

[RangerT]

Some members have bought theirs from Summit Racing or Stage 3. You might be able to find them if you look beyond the obvious source, Ford.

Check out this thread from a couple of years back - you never know.

https://www.ranger5g.com/forum/thre...on-my-2019-lariat-fx4-sport-super-crew.23037/

Like Morgan, I just can’t believe these are already discontinued - makes no sense.

I will contact stage 3 and see if they have any. Summits website says not available and I have done an extensive google search and called/emailed several online parts stores and they either say they can't get it or can special order it with no eta. After talking to Ford Performance I don't have any confidence in the special order. Unless someone physically has some sitting in storage/warehouse I don't think they will be able to get it. It doesn't make any sense to me either. I don't know why they would discontinue a part after just a few years that was popular in the aftermarket space as well. Thank you for the suggestions and info.

 

[LevittownFordParts.com]

The FP kits are gone but the factory paint to match parts should still be available. Feel free to PM Me with your VIN and I will check it out

- Benny

 

[Racket]

I guess the Ford Performance flares are no longer available. Darn.

Sponsored