RexTheRanger
Member
- First Name
- Jordie
- Joined
- Nov 14, 2024
- Threads
- 3
- Messages
- 19
- Reaction score
- 17
- Location
- Calgary, Alberta
- Vehicle(s)
- 2021 Ford Ranger XLT Tremor
- Occupation
- Consultant
- Thread starter
- #1
I am sure this has been answered already, so I do apologize if this is a repeat question.
Based on what I have already searched, The only difference in suspension between the Non-Tremor and Tremor models is a beefier pair of rear leafs, coupled with the Fox 2.0 suspension.
If this is correct, here is what I am looking to do:
I am always travelling for work, and Rex the Ranger is my only set of wheels. I am at the point of requiring a rebuild on my Fox suspension. Now, if I schedule this during a week where I work locally, and if the repair facility's turnaround is within a week, I can be without the truck and let them do their thing. (Fox's website does not let Canadian residents submit a rebuild request online, it looks like it has to be done by an authorized repair facility).
Otherwise, if I cannot swing a local week, I will need to get a pair of front and rears to swap in so that I can stay on the road while the shop rebuilds the fox ones. Preferably, I would like to just get a generic kit to run while they are in the shop. If I can find Fox ones at a good price, I would do that, but unfortunately I am on a bit of a tight budget.
Can it be confirmed that if I found stock ranger struts and shocks (Not Fox) that they would work with the truck?
EDIT: I am looking at these: 19-23 Ranger FOX 2.0 Stage 1 Suspension Package to see if they would bolt right in with no issues (aside from doing an alignment after install), then taking out the factory suspension, rebuild it, and store them until its time to rinse and repeat
Based on what I have already searched, The only difference in suspension between the Non-Tremor and Tremor models is a beefier pair of rear leafs, coupled with the Fox 2.0 suspension.
If this is correct, here is what I am looking to do:
I am always travelling for work, and Rex the Ranger is my only set of wheels. I am at the point of requiring a rebuild on my Fox suspension. Now, if I schedule this during a week where I work locally, and if the repair facility's turnaround is within a week, I can be without the truck and let them do their thing. (Fox's website does not let Canadian residents submit a rebuild request online, it looks like it has to be done by an authorized repair facility).
Otherwise, if I cannot swing a local week, I will need to get a pair of front and rears to swap in so that I can stay on the road while the shop rebuilds the fox ones. Preferably, I would like to just get a generic kit to run while they are in the shop. If I can find Fox ones at a good price, I would do that, but unfortunately I am on a bit of a tight budget.
Can it be confirmed that if I found stock ranger struts and shocks (Not Fox) that they would work with the truck?
EDIT: I am looking at these: 19-23 Ranger FOX 2.0 Stage 1 Suspension Package to see if they would bolt right in with no issues (aside from doing an alignment after install), then taking out the factory suspension, rebuild it, and store them until its time to rinse and repeat
Sponsored
Last edited:
