Bed Tent

[Johnpenn]

I am looking at serveral tents with Napier in the lead. But want about compatible air mattresses? Anyone fine one that is compatible?

https://www.amazon.com/gp/product/B01IVM1IU4/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

The AirBedz PPI-105 fits great along with the Napier 57066 tent and is comfortable.

Sponsored

 

[CountryDevil]

https://www.amazon.com/gp/product/B01IVM1IU4/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

The AirBedz PPI-105 fits great along with the Napier 57066 tent and is comfortable.

Have you had any issues with the reports of the pump not working or any other issues?

 

[Johnpenn]

Have you had any issues with the reports of the pump not working or any other issues?

Haven't used it that much but took the risk since I got a great price on one with a slightly damaged box from Amazon. I also have a portable compressor I can use in a pinch.

 

[deton8r]

Looks like you can now pre-order the Kodiak Canvas truck tent that will fit the Ranger. I have one for my F150 and it is way way more durable than the Napier one I looked at. For the air mattress, I just found an SUV one with similar dimensions (bed length to tailgate tip and width between wheel wells) that had a built in 12v pump inflator/deflator. I think it may have been marketed for a Suburban or Excursion but cant remember. The Ranger would use a slightly shorter one. The spaces in front and behind the wheel wells not covered by the air mattress are good for storing boots and gear.

There's a 5-star review from a UK owner with a 2018 Ranger.

https://www.kodiakcanvas.com/canvas-truck-tent-mid-sized-expected-restock-date-2-10-20/?revpage=1

 

[2020FX4]

I had a Napier truck bed tent on my F150 and it was great! IF I wasn't planning on getting a roof top tent for my ranger I would get another Napier.
I also used an Exped megamat which was wasn't cheap, but by far the most comfortable mattress I have ever slept on while camping.

https://www.amazon.com/Exped-Megamat-Insulated-Self-Inflating-Sleeping/dp/B01EOOP9V2

 

[Rviator]

I finally test fitted my bed tent. I had to shorten the fore/aft pole about an inch to get it to install. Unfortunately in the process I partially cut the elastic cord holding the sections together. Oh well it still assembles and does the job. If you see an extra "shelf" at the front of the bed that is due to my Loredo roll up tonneau cover. The tent has sufficient material to lay over top of the rolled up cover.

Sponsored