Search results

Most component systems come with a crossover box for each door. I didn't use the Morel X-over since the B&O has tweeter channels. The cap protects in case the active X-over electronics fail.

See my reply to one of your earlier posts and the one I sent Zaph earlier. I'd recommend that you do your sound deadening, change the speakers and listen to your system before you spend a lot more $$$ and do the amp and other electronics. You may be surprised.

I installed a pair of Morel TEMPO ULTRA 602 6.5" component speakers in the front. The Morel tweeters are 1.25 in. and rated to go down pretty far so I used 22mfd. I think the original tweeters had 33mfd. protectors but they looked like 1 in. diameter tweeters so probably rated higher range...

I'm pretty sure the cap is a bass blocker to protect the tweeter at high volumes. I wired one in with each new tweeter. Do you think that was a bad idea? It didn't seem to hurt the highs at all. I used high quality 22mfd Non Polarized electrolytic caps per some tables I googled. I had to...

I installed Sync 3.4 build 20021 last night. It took about 25 minutes but I already had the 1.18 map update installed. I noticed two problems after the install. The maps still show as 1.17 and the Climate controls are missing from the Home Screen as already mentioned by Nluongo. Sync 3.4 is...

I installed a pair of Morel TEMPO ULTRA 602 6.5" component speakers for the front and Morel Maximo Coax 6" for the rear doors. I decided to upgrade the rears since I was taking the panels and speakers off for sound deadening insulation anyway. The Maximos are cheap and sound much better than...

There are two retainers in the center of the tray that are awkward to push back in. Since you didn't remove the tray, they are already partially seated. I just pounded in the center of the tray forcefully with my fist to get it down. A rubber mallet might work too.

You and Phil were correct, I got an ESN error trying to use Phil's map delete file from Ford. I decided to just install the missing voice files with the autoinstall.lst info you provided to another member of the group. I think the 14G22 is all that is missing for me too. I hope that works...

Hi Phil, Your file might work for me if I substitute my license file in place of yours. Might be worth a try. Would you be willing to send it to me? I can message you my gmail address.

I get an error that the installation failed with an Error Code INSTL_ERR06

Thanks; that should help but my OCD requires that since I paid for NAV, I should get it to work and update properly.

I really appreciate your insight into whats going on here. The strange thing is that my nav seems to be working normally and I'm getting voice prompts. Only 4 items show up on the TVSU screen: 4U5T-14G381-AN 4U5T-14G391-CJ 4U5T-14G423-CA 4U5T-14G421-CAB This is the contents of the...

Thanks for responding. I have AU5T-14G421-CAB but no 14G422 in the diag screen. What does that mean?

Since the version number doesn't update in Sync 3.3, can anyone with a successful update tell me if there is a way to tell if the update worked? Maybe there is some new NAV feature or map function I haven't noticed. A little history. About a month ago I received an email from Ford about the...

I went directly to the battery terminals with an in-line fuse for my under-hood LED strip lights but that has a switch and uses very little power when on. There are several bolts you can attach to before or after the main battery fuse. I would recommend after the main fuse with a small in-line...

I used this kit and it did not stick well to the LineX so I bought a roll of VHB tape. https://www.amazon.com/gp/product/B007Y7E0CQ/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 I did not use the supplied Silicon because the LED strips had such poor adhesion. The VHB worked great. It's...

It sure would be nice if it did.

Have you purchased and installed one yet? I read some info in this thread about a copy of the Redtek mirror module being sold by another Australian company . Not sure if it is Trac Electronics that copied it and if they also stole the window module design from Redtek. It looks like the price...

Yes it does. I haven't pulled the plug yet because I haven't seen any independent reviews of this module and haven't been in a big rush to spend $ on more mods. Has anyone else tried it yet with good success?

I was originally planning to switch to the Ford full syn. Did you fid the noack number for that in your research?