What did you do to your Ranger today?

[dvh]

Sorry,I didn't see this yesterday. Yes Erik's right they will work without a lift. They're only 1" taller than the stock tires and same width.

Thank you. no worries about any response delay. one further question...when you have these installed, do you make any changes to the speedo to assure accuracy?

-dvh

Sponsored

 

[Jbroke]

Threw on a quick sticker, always hated the look of these little windows (not to mention it’s not automatic in a lariat) would prefer a full back windshield but a sticker makes it look slightly better.

 

[AzScorpion]

Thank you. no worries about any response delay. one further question...when you have these installed, do you make any changes to the speedo to assure accuracy?

-dvh

Mines off about 3-4 mph at 60 but I haven't done anything to it. I know you can do it with ForScan but I didn't want to mess around with it.

 

[dvh]

Mines off about 3-4 mph at 60 but I haven't done anything to it. I know you can do it with ForScan but I didn't want to mess around with it.

i would guess that most owners do not even know about ForScan, so I am guessing that a dealer would normally fix this? is this true?

 

[Jbroke]

Installed husky liners and took off the running boards, now I can actually get into the truck without hitting my shin haha

 

[HTX1811]

Go Razarboacks!!!

LOL
A for Arkansas, right?????

Threw on a quick sticker, always hated the look of these little windows (not to mention it’s not automatic in a lariat) would prefer a full back windshield but a sticker makes it look slightly better.

 

[Jbroke]

Go Razarboacks!!!

LOL
A for Arkansas, right?????

Atlanta Braves.....

go gators! Haha

 

[Glocker]

Nothing big here. When I added the Draw Tite tow hitch to my truck I found it sat too far forward and under the bumper for my ball mount to work. That, combined with the high rear end of the Ranger compared to my previous tow vehicle, a 1998 Explorer, I needed a new ball mount. I decided to go with an adjustable unit I scored for $62 on Amazon. It seems pretty stout!

My old tow rig:

I can't wait to get my boat out to the water this season with my Ranger!

 

[rang19ca]

looks good! How long do you think the Plastidip will last? What made you choose that over high heat paint?

I think the plastidip should survive ok. The tail pipe doesn't get very hot and since I already had some, it was a no brainer to use it. I drove it almost 40 miles today and it looks fine so far.

 

[Chappy]

I think the plastidip should survive ok. The tail pipe doesn't get very hot and since I already had some, it was a no brainer to use it. I drove it almost 40 miles today and it looks fine so far.

Good to know! I'm working on blacking out all chrome so I'll add that to my list. Thanks

 

[AirborneRanger]

Went and bought some raptor wheels. Covid-19 discount!

 

[Rinn69]

I think the plastidip should survive ok. The tail pipe doesn't get very hot and since I already had some, it was a no brainer to use it. I drove it almost 40 miles today and it looks fine so far.

I had it on the tips of my 2013 Ram for at least 2 years--no issues

 

[Chappy]

I had it on the tips of my 2013 Ram for at least 2 years--no issues

Did you find any problems removing the plastidip after the 2 years?

 

[JaysOnTheEDGE]

I used that exact product on two vehicles just yesterday. And wouldn't you know it, I drove one of them to work today and it rained on the way to work. Oh well, should clean up a like easier now.

i poured some of the ceramic wax into a bottle with meguiars spray wax and heated it up a bit in some hot water to help it thin out and mix and i went back over the wax today and now it shines bright; the metallic in the ingot silver really pops now and the paint is really slick. Will probably grab the ceramic booster spray after i run out of spray wax

 

[Rinn69]

Did you find any problems removing the plastidip after the 2 years?

I sold it, so.... ?‍

Sponsored