What did you do to your Ranger today?

[AzScorpion]

Fahrvergnügen

FIFY

lol...I knew the OCD in you just could let that go!

Sponsored

 

[subquark]

What magnets are you using to hold the liner? I put strong magnets on my filter but I don't think they're strong enough to hold the liner up.

How about rivet nuts?
https://www.ebay.com/itm/333907878427
https://www.ebay.com/itm/401545378985

And I use these chunky 110 pound magnets for my BedRug:
https://www.amazon.com/dp/B08GCP8MXW?th=1

And I intend to use these 33 pound ones for the anti-mouse screen for the cabin air filter:
https://www.amazon.com/gp/product/B08C7SXBKZ?th=1

 

[subquark]

Ohh, I also dropped my flashlight down on top of the transmission. And because it has a magnetic tail cap it's stuck there until it vibrates free... Guess I'll need to buy another light - and this is why I spend 50-100 from olight vs 200-300 for the nicer lights...

I'm a big fan of Olights. I have two that I've used for five years now - pretty much daily use for the dog outside.

I have a new one in the truck that I like a lot, it can be a flashlight and a lantern.

I do like the magnetic base and store the first two on the fridge near the back door. I like the magnetic charger for them.

I do wish there was something similar US-made - if you know any, let me know.

Good luck retrieving i, if at all possible.

more pics here: https://www.ranger5g.com/forum/thre...e-mail-today-for-your-ranger.1866/post-689938

 

[OrangeStreak]

How about rivet nuts?
https://www.ebay.com/itm/333907878427
https://www.ebay.com/itm/401545378985

And I use these chunky 110 pound magnets for my BedRug:
https://www.amazon.com/dp/B08GCP8MXW?th=1

And I intend to use these 33 pound ones for the anti-mouse screen for the cabin air filter:
https://www.amazon.com/gp/product/B08C7SXBKZ?th=1

Don't let this guy become a resident in your Ranger...

 

[Jhbryaniv]

I'm a big fan of Olights. I have two that I've used for five years now - pretty much daily use for the dog outside.

I have a new one in the truck that I like a lot, it can be a flashlight and a lantern.

I do like the magnetic base and store the first two on the fridge near the back door. I like the magnetic charger for them.

I do wish there was something similar US-made - if you know any, let me know.

Good luck retrieving i, if at all possible.

more pics here: https://www.ranger5g.com/forum/thre...e-mail-today-for-your-ranger.1866/post-689938

Sadly I don't know of any American manufacturers who create reliable and inexpensive flashlights...

They all seem to be very proud that they have the most expensive products...

 

[OrangeStreak]

Nothing special...just connected the NOCO to let it do it's desulfating thing:

 

[Jason B]

My dad had a flashlight that was made by Pelican some 30 years ago. Damn thing is near indestructible. Except the bulb, which is Xenon and cost about $25.

 

[MXGOLF]

I rotated my tires on Lucille. That about killed this old guy. LOL Those suckers are heavy. Thank God I have all the air and tools to make it easier.

 

[DonS]

MXGOLF, You need one of these, makes changing tires so much easier on us old guys.

 

[Jhbryaniv]

MXGOLF, You need one of these, makes changing tires so much easier on us old guys.

If @MXGOLF has trouble rolling tires, what makes you think pushing them on 4 small wheels would be easier?


LOL

 

[DonS]

To lift them onto the luggs

 

[Jhbryaniv]

How about rivet nuts?
https://www.ebay.com/itm/333907878427
https://www.ebay.com/itm/401545378985

And I use these chunky 110 pound magnets for my BedRug:
https://www.amazon.com/dp/B08GCP8MXW?th=1

And I intend to use these 33 pound ones for the anti-mouse screen for the cabin air filter:
https://www.amazon.com/gp/product/B08C7SXBKZ?th=1

ok, so back to this post - what rivnut install tool are you using? one from harbor freight? I feel like this would be a good tool to have in my arsenal - a rivet and rivnut installer.

 

[Jhbryaniv]

To lift them onto the luggs

yeah, but it is more fun to picture @MXGOLF trying to carry the tires around the truck instead of rolling them . . .

 

[subquark]

If @MXGOLF has trouble rolling tires, what makes you think pushing them on 4 small wheels would be easier?

LOL

I'm so close to buying one of these - the ability to hold it at the right height and turn it to line up the studs is what I want! =)

Yes, please! =D

what a bargain and it's US-made, only $1,462.50! =p

 

[subquark]

ok, so back to this post - what rivnut install tool are you using? one from harbor freight? I feel like this would be a good tool to have in my arsenal - a rivet and rivnut installer.

LOL, a tool would be nice but this works (not my hand):

Sponsored