Bed cover questions.

[Ralphie]

Installed the Gator EFX Hard Cover yesterday. Had to run to the hardware store twice. Once to get 2 washers that were missing and again to get threaded screws as the Spray in Bed Liner had covered the threads in the bed.

Are there drain tubes that come with this hard cover? Where are you installing them if there are, could you take a picture? Mine has the spray-in bed liner from Ford direct, and I don't see anywhere to put the 1/2"-3/4" drain tubes (that I'm familiar with from my F-150 cover). Thanks for your help!

Sponsored

 

[FULLSCALE]

Are there drain tubes that come with this hard cover? Where are you installing them if there are, could you take a picture? Mine has the spray-in bed liner from Ford direct, and I don't see anywhere to put the 1/2"-3/4" drain tubes (that I'm familiar with from my F-150 cover). Thanks for your help!

When I get my cover I plan on running them through the two plastic oval plug/grommet things at the front of the bed.

 

[srgredranger]

Undercover flex here, like it

 

[HotPepperRedRanger]

I had the bed rug and undercover flex installed this week. Both are really nice. Went through a high pressure car wash today and the bed rug was completely dry afterwards. I am well pleased with the products.

 

[FULLSCALE]

Another vote for Undercover here. Mine’s an Ultra Flex with the LED bed light.

 

[FFRICH]

I had a bakflip on my Frontier got it from amazon very easy to install. going to buy a retractable this time.

https://www.amazon.com/gp/product/B01MT1GNKA/ref=ask_ql_qh_dp_hza

 

[Sandman Ranger]

BAKflip.
I installed this weekend.
With Ford bed lights, like a little camper. Wife said more like a coffin! Ha!

 

[SemperVee]

I installed myself a Gator EFX and pretty happy with it. Only issue was the channel clamp "can" bend the tin where it clamps on the Ranger lip. Other than figuring out the parts it was a snap to install right the first time. Did not install the drain tubes.

 

[BZAMORA13]

I did the "Roll N Lock". $1600 on web. $1100 from Summit Racing Two guys, 1 hour install. Love it.

What model did you get? Do you mind sending a link?? Thank!!

 

[JMM_AZ]

What model did you get? Do you mind sending a link?? Thank!!

summitracing.com
part #RNL-BT122A

 

[Diver Stu]

Another vote for Undercover here. Mine’s an Ultra Flex with the LED bed light.

Question on the bulkhead seal with the spray-in bedliner. Did you stick it to the bulkhead or to the cover? Mine is coming off on one side a little. I have a replacement, but it looks like if you stick it to the cover it would go on the rubber seal.

 

[Richard Conley]

BAKflip.
I installed this weekend.
With Ford bed lights, like a little camper. Wife said more like a coffin! Ha!

I have Line-X version of the BakFlip and have been happy with it. The only difference is the panels on the Line-X version have the mid-level Line-X coating. This pic confused me a bit until I realized that you have a SuperCrew - the SuperCab have 4 panels due to the extra bed length.

 

[FULLSCALE]

Question on the bulkhead seal with the spray-in bedliner. Did you stick it to the bulkhead or to the cover? Mine is coming off on one side a little. I have a replacement, but it looks like if you stick it to the cover it would go on the rubber seal.

I’m pretty sure mine Is stuck to the bulkhead spacer/bracket thing that bolts to the bulkhead.

 

[Diver Stu]

I’m pretty sure mine Is stuck to the bulkhead spacer/bracket thing that bolts to the bulkhead.

Mine doesn't have a bracket that bolts to the bulkhead. I have the undercover ultra flex, thought you had the same.

 

[FULLSCALE]

Mine doesn't have a bracket that bolts to the bulkhead. I have the undercover ultra flex, thought you had the same.

I do have the same one. Sounds like they may have possibly updated the cover as mine is a year old now. On mine there is definitely a bar that bolts to the top of the bulkhead of the bed to make it the same height as the bed rails.

Sponsored