What did you do to your Ranger today?

[Ugly_Betty]

Added the EGR matte window visors today.

Sponsored

 

[RedDakooter05]

Added the EGR matte window visors today.

Huh... Kinda like the look of matte over my glossy with a billion swirl marks version.


Whats the part number?

 

[Ugly_Betty]

Huh... Kinda like the look of matte over my glossy with a billion swirl marks version.


Whats the part number?

https://egrusa.com/products/side-window-deflector/1946

 

[that408guy]

Some camping trips. Buddy Heater pretty much makes 30 degree nights a non-factor. Low setting (20lb tank will last 220 hours) more than enough to keep the interior toasty.

What tent is this? OOPS! Just saw your other posts. Digging the set up.

 

[WV_Ranger]

Put these factory 19 lariat wheels on to replace my factory chrome. Chrome on silver just doesnt do it for me. Great upgrade!

 

[OFC Ranger]

What tent is this? OOPS! Just saw your other posts. Digging the set up.

Yea.

ARB 8x8 awning and the ARB tent attachment.

Luckily I've had them for a while and both only set me back about $400-$500.

Pricing now looks to be about $700-800 in current market. =/

 

[Ranger X3]

I brought the Ranger to the dealer to checkout a HVAC concern, it goes from blowing out hot air to cold air randomly. No codes were thrown and they concluded the sensor is picking up heat from the sun and it's telling the system to cool things down, not the answer I was expecting. They had one 2020 Scab XLT on the lot for $31,000 with 32,400 miles, seemed kinda high to me.

 

[12Bravo20]

I used my FordPass points and got the Ford trailer brake control installed at the dealership today.

 

[AndyMedic]

85% done. Snow and rain came in and cut my day short. It looks awesome. I can’t speak highly enough of the kit.

 

[RDJTX]

Did a couple of things, Got my hood struts put on, much cleaner look than the hood prop, got my plates and inspection sticker, added washer fluid. didn't realize that would take a full gallon when empty. was going to put the black letters on the tail gate but ran out of light, oh well. will get them done next time I get a good dry not humid day

 

[Dr3wDrop]

Added the EGR matte window visors today.

Logo's come off or are they molded on?

 

[Jake]

Rear pads. Inners wore much faster, probably in part from my parking brake cables having seized up. The slide pins were still moving fine on both calipers. Took them apart and put on some fresh lube to hopefully keep these new pads from doing the same.

 

[lukdeg]

I did play with those today.. still waiting for truck delivery!

 

[Kodiacnb]

Just waiting for it to warm up a bit so I can attempt to install this puppy.

 

[lukdeg]

is this a 2 channel setup or just 1 cam?

Sponsored