Ranger tonneau cover

[philanderer]

went with tyger t1. not sure if the prices have changed since i ordered but if you order off their website you will get a 10% off discount code. it was $215 for me delivered. the cross bars are domed ( to keep water from sitting on the cover, not sure that is really ever an issue) so if you want low profile look elsewhere. i like the tension control on the rear. i went with the setting it had and there is a small gap so i may make an adjustment when i get a chance.

Sponsored

 

[Clint]

Did you ever resolve this? I was starting the installation of my Truxedu LoPro yesterday and the back braces gave me fits. I got them in, but they to do NOT sit flush within the bed rail channels like the diagram shows. That long "arm" actually sits outside of the bed rail lip, under the plastic cover, and actually pokes out into the bed a hair. This is for both braces on both sides. I'll try to get a picture when it is light out.

Apart from prying the bed rail open, I can't see how this brace will ever look like it does in the diagram. For now I am just assuming it is not REALLY suppose to lay within the bed rail lip/channel. Can anyone confirm this?

I got this video from the Real Truck guys because I was having difficulty trying to make the brackets by the tailgate for my Gator EFX hard folding cover work. This video is actually for the BAKflip tonneau, but was very similar to the Gator and looks similar to the brackets you have. Hope it helps.

 

[AzScorpion]

Does anyone know if there's soft rollup bed cover that will work with a drop-in bed liner, like a Truxedo, etc?

I have the drop in liner (I wanted a spray liner but dealer had already had this one in) and the Access Vanish soft tonneau cover works great with it. Like Frank said there's a little bit of trimming in the front lip by the bulkhead that needs trimming but it's super easy. Just make sure you put the shims in-between the rails the correct way or the rails will constantly fall off. Ask me how I know! ??‍

https://www.autoanything.com/tonneau-covers/access-vanish-tonneau-cover

 

[Deleted member 15875]

I have the drop in liner (I wanted a spray liner but dealer had already had this one in) and the Access Vanish soft tonneau cover works great with it. Like Frank said there's a little bit of trimming in the front lip by the bulkhead that needs trimming but it's super easy. Just make sure you put the shims in-between the rails the correct way or the rails will constantly fall off. Ask me how I know! ??‍

https://www.autoanything.com/tonneau-covers/access-vanish-tonneau-cover

Cool. I've been trying to narrow it down but there's a few choices in the market.

 

[AzScorpion]

Cool. I've been trying to narrow it down but there's a few choices in the market.

There's some really good ones out there now. I had a Truxedo Lo-Pro on my Tacoma and it was a really nice cover too. But I usually don't keep my trucks for long and there was a big difference in price between the two. So far after 3 years I have zero regrets about getting the Access Vanish cover.

 

[Deleted member 15875]

There's some really good ones out there now. I had a Truxedo Lo-Pro on my Tacoma and it was a really nice cover too. But I usually don't keep my trucks for long and there was a big difference in price between the two. So far after 3 years I have zero regrets about getting the Access Vanish cover.

I'm still coming to grips with new Fox suspension and the install costs. Maybe need to wait a bit more.

 

[AzScorpion]

I'm still coming to grips with new Fox suspension and the install costs. Maybe need to wait a bit more.

Nawww.....It's like ripping a Band Aid off. Just do it quickly and it's less painful. ?

Sponsored