Looking for someone who has used +1 offset wheels with 32.5 tires to 33"

[ICE 27]

What did you have to do to fit your +1 wheels with 32.5 to 33" tires with a 2.5" lift?
I'm asking because I can get a good deal on wheels. I prefer more postive offset but I like the wheels. I'm trying to decide if the pleasure will be worth the pain I cause myself.

Sponsored

 

[Flowgod]

What did you have to do to fit your +1 wheels with 32.5 to 33" tires with a 2.5" lift?
I'm asking because I can get a good deal on wheels. I prefer more postive offset but I like the wheels. I'm trying to decide if the pleasure will be worth the pain I cause myself.

I have 0 offset wheels with 265/70/17's. All I had to do was replace the front crash bars. Tiny bit of rub on the rear but I don't notice it, I still need to replace them but just haven't had the time

 

[ICE 27]

I have 0 offset wheels with 267/70/17's. All I had to do was replace the front crash bars. Tiny bit of rub on the rear but I don't notice it, I still need to replace them but just haven't had the time

Thanks

 

[Frenchy]

With a tire that big and a wheel offset like that even with a chrashbar change or delete you still run a big chance of rubbing.

Mind you I have 285/70-17 Firestone Destination XT's on the factory sport wheels with no spacers and the Old Man EMU lift. Do I rub when turning? Only at full lock. Did I do anything to the crash bars? Yes. I removed the plastic covers up front and pushed the bars forward. It worked well too.

 

[DukeCanBuildit]

Be prepared to remove your crash bars or replace them with something like the ReadyLIFT anti-intrusion beams. With 275/70R17s (32.2”) and +15mm offset, I was too close to rubbing but made the swap anyway. At 0 offset, you’re gonna rub with 32s, might even need to trim wheel liners with 33s.

You’ll also have a lot of poke and may have to move to NC, SC, or GA so you fit right in. ?

Good luck.

 

[ICE 27]

With a tire that big and a wheel offset like that even with a chrashbar change or delete you still run a big chance of rubbing.

Mind you I have 285/70-17 Firestone Destination XT's on the factory sport wheels with no spacers and the Old Man EMU lift. Do I rub when turning? Only at full lock. Did I do anything to the crash bars? Yes. I removed the plastic covers up front and pushed the bars forward. It worked well too.

Thanks for the pics

 

[ICE 27]

Be prepared to remove your crash bars or replace them with something like the ReadyLIFT anti-intrusion beams. With 275/70R17s (32.2”) and +15mm offset, I was too close to rubbing but made the swap anyway. At 0 offset, you’re gonna rub with 32s, might even need to trim wheel liners with 33s.

You’ll also have a lot of poke and may have to move to NC, SC, or GA so you fit right in. ?

Good luck.

Yeah, local kid has a Toyota with - 12 . He let me look at his. Sticks out more then I would want. I just liked the wheels and they were a good price. Probably going to try to stay around + 20.

 

[DukeCanBuildit]

Yeah, local kid has a Toyota with - 12 . He let me look at his. Sticks out more then I would want. I just liked the wheels and they were a good price. Probably going to try to stay around + 20.

I think you’ll find some decent selection in the +25, +20 range - supply/inventory might be another story. Happy hunting. ?

Sponsored