Bed cover questions.

[Igor]

When I ordered my Ranger, I also ordered a hard folding tonneau cover. Tri fold. I’m not sure of the brand from the factory, but I REALLY like it. One of the best things I ordered for the truck.

Thinking to do the same.
Does anyone know if it will be possible to add Yakima bed rack later over the cover or I need to add rack fist?

Sponsored

 

[Tracy Bowman]

Thinking to do the same.
Does anyone know if it will be possible to add Yakima bed rack later over the cover or I need to add rack fist?

I'm not sure, but I don't think you can put a rack with the one I got.

 

[LaKings]

Hi everyone - Question; For those of you with Gator, Undercover or BakFlip covers, do any of you also have a factory drop-in liner? I'm trying to figure out if installation is going to be a pain in the butt. I've read that I may need to make "notches" and i'm not sure if that means I would have to remove the in-line to cut pieces out or? Thanks in advance for any insight.

 

[micl9]

I do have the same one. Sounds like they may have possibly updated the cover as mine is a year old now. On mine there is definitely a bar that bolts to the top of the bulkhead of the bed to make it the same height as the bed rails.

I just got a used Undercover Flex and it has the bulkhead bar and no corner brackets. I called Undercover and they indeed did make a design improvement. Seems the Al bed we have is not ideal for clamping things to, especially as a cantilever. The steel brackets end up as the clamping surface for the end clamps.. The sell an upgrade kit for ~$60. Also those of you that are original owners you might see if they can cover under warranty.

 

[FULLSCALE]

I just got a used Undercover Flex and it has the bulkhead bar and no corner brackets. I called Undercover and they indeed did make a design improvement. Seems the Al bed we have is not ideal for clamping things to, especially as a cantilever. The steel brackets end up as the clamping surface for the end clamps.. The sell an upgrade kit for ~$60. Also those of you that are original owners you might see if they can cover under warranty.

Did you get them to send you a set? I'd be interested in seeing them if you do!

 

[micl9]

Did you get them to send you a set? I'd be interested in seeing them if you do!

That was my understanding - everything below except A, J and L is what I am guessing.
And yes the taller rubber seal repalces the bulkhead bar. Makes sense as the bar was not sealed.

 

[micl9]

What are the Step Spacers for ?

Goes between the bracket and the plastic bed rail cap.

 

[SuperBford]

Very interested to see how this comes out as I'm looking at a Retrax One XR

 

[micl9]

Got the kit this morning. Undercover is an awesome company to deal with. The kit included everything shown in the description I posted earlier PLUS new external clips used to hold the cover flat, more on that later.
The new front seal is MUCH taller and is an extruded seal, so much harder and more duarable.

All the parts - like the new black clamps

Now the bonus parts. New clips that install much more robustly.

The old ones just have a screw that goes in from the top (sorry about the focus, but if you are reading this you likely already have one and know what it looks like!)

The new one (RH below) adds a boss that stick into the cover and will take a MUCH higher shear load. The screw now going in from that back side will also dramatically increase the pull out force. All in all a very good design improvement. You will need to drill some holes to install this and the directions are not that clear about that, but pretty straight forwad. Drill a screw sized thru hole thru both sides of the cover using exting threaded hole as a guide. Then from the top side drill a boss sized hole just thru the top surface, if you blow thru both you will need a washer for the screws supplied. They dont supply washers, so I assume the correct way is just thru the top side.

Somewhat long post and picture heavy. But I am really impressed with Undercover support after the sale. 2nd Undercover tonneau I have had and second time I was able to upgrade an old design to the current.

 

[micl9]

Install is done - very easy. Had to clean out the holes and threads of bed liner with a file and tap, but to be expected. New clip is definitely more robust.
Anyone with an undercover - can you comment on how far back it sits? How much of the tailgate is covered?

Here is what mine looks like

You can see the hail damage which got me a $100 cover. ?
Trying to come up with ways to cover that, thin diamond plate, heavy gauge textured auto wrap.

 

[Jamesb]

Install is done - very easy. Had to clean out the holes and threads of bed liner with a file and tap, but to be expected. New clip is definitely more robust.
Anyone with an undercover - can you comment on how far back it sits? How much of the tailgate is covered?

Here is what mine looks like

You can see the hail damage which got me a $100 cover. ?
Trying to come up with ways to cover that, thin diamond plate, heavy gauge textured auto wrap.

Hi Mike,

Here are a few pics of my install. I have the metal bracket bulkhead version.

 

[micl9]

Hi Mike,

Here are a few pics of my install. I have the metal bracket bulkhead version.

Thanks James
Mine is positioned a tad forward as the flap at the bulkhead is pretty much covering all of it and your is about 1/2 coverig. Probably have room to pull back a little more as I am more worried about leaking at the tailgate than the bulkhead. Although with the gaps around the tailgate probably doesn't matter!
Thanks for posting - I like the finish on the Ultra more than what comes on the std Flex.

 

[Jamesb]

Thanks James
Mine is positioned a tad forward as the flap at the bulkhead is pretty much covering all of it and your is about 1/2 coverig. Probably have room to pull back a little more as I am more worried about leaking at the tailgate than the bulkhead. Although with the gaps around the tailgate probably doesn't matter!
Thanks for posting - I like the finish on the Ultra more than what comes on the std Flex.

Cheers Mike, I wanted the carpet on the underside and also got sucked in by the "light included". Although, I'm not sure how the Ultra finish would look after your hail storm tho!

 

[ElSolo]

I went with the Vanish soft tonneau cover by ACCESS. Installed it about 3 months ago and it's been great so far. It keeps everything in the bed dry (minor drops will get in through places where the seal isn't perfect... likely the tailgate area) but nothing to worry about. It was reasonably priced, made in USA, and looks great on the Ranger! It sits almost flush with the top of the bed (about .25"-.5" above the top) and material has a nice leatheresque appearance to it. I wasn't too worried about sacrificing the security of a hard top since I don't plan on keeping anything too valuable in there. I'm currently rolling around with a couple of foldable canvas chairs that max out at ~$10 each. it's mostly for our road trips and weekend trips to visit family.

https://www.accesscover.com/vanish/...V9-pYSFI1K25Z1MctIRDjwdts99qmEzxoCOP4QAvD_BwE

 

[micl9]

Do seals with 3M tape adhere well to spray-in bed liner ?

Key is prep - I washed with simple green, then flushed with water, then used IPA for final clean. It stuck now, but only time will tell.

Sponsored