Sponsored

Instructions to remove steering wheel trim.

Zvedza

Well-Known Member
First Name
David
Joined
Jul 28, 2021
Threads
2
Messages
242
Reaction score
575
Location
Florida
Vehicle(s)
'21 Ranger Tremor, '04 SVT Lightning, '16 ZX-10R
Apparently its held in by screws that can only be accessed once you take off the steering wheel.
 

mailbox4449

Well-Known Member
Joined
Jan 31, 2022
Threads
3
Messages
474
Reaction score
980
Location
Illinois
Vehicle(s)
Not sure yet
There is a YT vid regarding a shop swapping out the steering wheel on a Ranger. They installed an aftermarket, but used parts of the old one as well.
 

Rob09

Well-Known Member
Joined
Oct 17, 2021
Threads
4
Messages
274
Reaction score
1,163
Location
Sydney, Australia
Vehicle(s)
2021.25 XLT
As in the trim section holding the buttons, on the wheel itself?

Although the way the airbag is removed is different, everything else I've seen (including above mentioned video), leads me to believe that the trim/button area of the wheel is similar, if not the same, as our (Oz) ones.

That means there's 4 torx screws holding it on from the back. Unfortunately, even if you undo these, you need to remove the airbag section as the trim sits in behind it (see pic) and you need to unplug the loom going to the wheel switches, which is also behind airbag.

Lip.jpg
 
Last edited:

awd.nv

Well-Known Member
First Name
Anthony
Joined
Apr 26, 2021
Threads
30
Messages
1,257
Reaction score
2,366
Location
Las Vegas, NV
Vehicle(s)
'21 Ranger XLT Tremor
Occupation
Computers
JUST remember, if you mess with airbags, ALWAYS disconnect the battery. Just wanna throw that out there.
Sponsored

 
 








Top