Drivers seat lumbar pop

[MFTremor]

Earlier today I was adjusting myself in the drivers seat to get comfortable, and I heard a pop and my lumbar sunk all the way in. My question is what parts do I need to replace to get my lumbar support back? 2021 Tremor.

Thanks!
Matr

Sponsored

 

[RangerBill]

Check with Benny at Levittown Ford to make sure.
https://parts.levittownfordparts.com/oem-parts/ford-seat-lumbar-support-cushion-cu5z9665500u

You might want to take a look at the lumbar assembly to see if a hose popped off or something minor happened.

 

[MFTremor]

Check with Benny at Levittown Ford to make sure.
https://parts.levittownfordparts.com/oem-parts/ford-seat-lumbar-support-cushion-cu5z9665500u

You might want to take a look at the lumbar assembly to see if a hose popped off or something minor happened.

I pulled the back of the seat up and to me it looks like this broke

 

[MFTremor]

Found the culprit! Now how do I fix it?

 

[MFTremor]

Here is the piece that broke:

 

[MFTremor]

And here was my solution:

I used some stainless zip ties to hold the cable elbow in place. Hopefully it'll hold up!

 

[mrmike7189]

A wooden block, zip ties and/or duct tape . It fixes everything!

 

[RangerBill]

Here is the piece that broke:

Maybe you could find someone to weld it back together.

 

[MFTremor]

Maybe you could find someone to weld it back together.

I dunno, its pretty thin. I'm thinking it would more than likely break in the same place.

 

[airline tech]

Unfortunately, its part of the assembly and not separate

 

[Ranger X]

Unfortunately, its part of the assembly and not separate

@airline tech - You never cease to amaze me with your responses and diagrams and pictures, where the hell do find all that stuff??? Please keep it up because you are awesome!!!

 

[Msfitoy]

3D print...kiddin...have you thought of using a screw worm hose clamp?

 

[MFTremor]

3D print...kiddin...have you thought of using a screw worm hose clamp?

I thought of that, but the hole I need to run it through is too small and I can't get anything in there to drill it out any.

Sponsored